![6x135 to 5x5.5 - 14MM 1.50 / 2" THICK / 87.1MM CB](http://farfromstockstore.com/cdn/shop/products/billet_adapter_6_to_5_lug_6_512x497.jpg?v=1634581760)
6x135 to 5x5.5 - 14MM 1.50 / 2" THICK / 87.1MM CB
Vehicle: 6 x 135mmWheel: 5 x 5.5" (139.7mm)2" Thick14mm 1.50 studs87.1mm (3.429") Center BoreIncludes: 14mm 1.50 open end lug nuts (5 pcs)
Big Order? No Problem! Financing available through QUADPAY or PAYPAL 0% 6 Months Approval is Quick & Easy.
Vehicle: 6 x 135mmWheel: 5 x 5.5" (139.7mm)2" Thick14mm 1.50 studs87.1mm (3.429") Center BoreIncludes: 14mm 1.50 open end lug nuts (5 pcs)
Vehicle: 6 x 135mmWheel: 5 x 5.5" (139.7mm)2" Thick1/2"-20 studs OR 14mmx1.5 stud87.1mm (3.429") Center BoreIncludes: 1/2"-20 open end lug nuts (5...
View full detailsVehicle: 6 x 5.5" (139.7mm)Wheel: 6 x 5.5" (139.7mm)1.25" OR 1.5" Thick14mm 1.50 studs108mm (4.252") Center BoreIncludes: 14mm 1.50 open end lug nu...
View full detailsVehicle: 6 x 5.5" (139.7mm)Wheel: 6 x 5.5" (139.7mm)B = 1.25" Thickness14mm 1.5 StudsHub and Wheel Centric Chevy Application
Vehicle: 6 x 5.50" (139.7mm)Wheel: 5 x 4.50" (114.3mm)2" Thick14mm 1.50 studs108mm (4.252") Center BoreIncludes: 14mm 1.50 open end lug nuts (5 pcs)
Vehicle: 5 x 5.5" (139.7mm)Wheel: 5 x 5.5" (139.7mm)1.50" Thick1/2"-20 studs77.8mm (3.063") Center BoreIncludes: 1/2"-20 open end lug nuts (5 pcs) ...
View full detailsVehicle: 6 x 5.50" (139.7mm)Wheel: 5 x 4.75" (120.65mm)2" Thick12mm 1.50 studs108mm (4.252") Center BoreIncludes: 12mm 1.50 open end lug nuts (5 pcs)
Choose 6 Inch front lift leaf spring pair only (no additional components) for a 72-93 w250 or w350 (even a w150 frame) 1st gen dodge with a cummins...
View full detailsFits 7/8” heim bore, 9/16 bolt diameter. 2” width installed as a pair. Zinc
One 7/8 offset rod end with 3/4 bore with jamb nuts. Choose right or left hand thread
PURCHASE IN BULK AND SAVE! 7/8" x 7/8" Heat Treated Chromoly Rod Ends with Jam Nuts You get two 7/8" Heims with a 7/8" through bore, zink plated ja...
View full detailsThis is it, a pair of FFS 7/8" x 7/8" Heat Treated Chromoly Rod Ends with all the trimmings! You get two 7/8" Heims with a 7/8" through bore, 4 zin...
View full detailsUsed good condition 72-80 dodge truck core support. Probably not in stock but we will round it up.
EXACT REPRODUCTION Control Arms/ A-arms for your 72-93 Dodge D250 and D350 truck equipped with 3800 or 4000 lb front axle ratings. Perfect for coll...
View full detailsThis is our regular chassis link bracket for frame end link mounting, usually lower, like a lower 4 link or control arm or traction bar mount, but ...
View full detailsAfter years of hearing people say you can’t do a crossover steering conversion (best upgrade you can do for your old dodge steering/handling) to a...
View full detailsNOT A BOLT ON PRODUCT. Fox Emulsion / Reservoir 2.0 shocks for the front and rear for your truck. 0-3” lift, 4-5” lift, 6-8” lift. Shocks with rese...
View full detailsThis air tank mount is designed to bolt on 2 Accuair 5 gallon Endo tanks. The perfect support system for one of our rear air suspension kits. It...
View full detailsIt is common for these old trucks to have a great frame with a rust hole behind the front spring shackles of the rear springs. Especially bad on...
View full detailsThis is a Bolt On Coil Spring, Link Suspension conversion for a 1972** - 1993 dodge truck frame (1/2 ton, ramcharger, 3/4 or 1 ton, 2wd [*] or 4...
View full detailsHD 1.5” x .250 wall Dom tube tie rod, welded and powdered wrinkle black, in either heim type tie rod ends or standard tie rod ends for your 72-93 d...
View full detailsRear Air Suspension for your First Gen Dodge (1G w/ 3rd Gen & 4th Gen AAM 11.5 Axle). This is the back half of our long travel air suspensi...
View full detailsCopyright © 2024 Far From Stock .