7/8" DIY Heim Steering Kit (55” Tubing)
This is your not so basic steering setup that uses 7/8" heims with easier adjustment & much stronger tubing. The kit can be used over or under ...
View full detailsBig Order? No Problem! Financing available through QUADPAY or PAYPAL 0% 6 Months Approval is Quick & Easy.
This is your not so basic steering setup that uses 7/8" heims with easier adjustment & much stronger tubing. The kit can be used over or under ...
View full detailsThis cure is for the OEM Jeep Y link steering and is designed around the OEM Jeep tie rod end. Use on any other steering kit is at your discretion....
View full detailsBefore you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...
View full detailsThese are the bolts you need for the Pumkin side of a D44 and are pretty much standard, The exception being that they are .625" (5/8) rolled thread...
View full detailsNOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4 OD OR MORE THAN 4" These are designed with an offset so you can pull them way b...
View full detailsINCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 2.75" Width: 2.0" These Spring Perches are made for Early CJ & M series Jeep widt...
View full detailsYou will receive: 2 - spring under leaf spring plates for 2.5" springs 2 perches for 3", 3.25" or 3.5" axle tube and 2.5" wide 4 U-bolts 8" Long a...
View full detailsThe Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a S...
View full details3/8" Thick Sold Individually These are .375" thick standard shackles. The ends are completely round to avoid any grab points from rocks. They hav...
View full detailsThis is a pretty much our standard U-bolt made for 3" diameter axles, the exception is that they are .625" (5/8) Rolled Threads for extra strength ...
View full detailsINCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 3.0"/3.25"/3.5" Width: 2.5" After we started our Desert Racing products I saw an obvi...
View full detailsThis is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. The kit can be used with s...
View full detailsThis gasket is designed for Dana 30 differential cover.
3/8" Thick Sold Individually These are .375" thick standard shackles. The ends are completely round to avoid any grab points from rocks. They hav...
View full detailsThis u-Bolt retention plate is made for CJ & M Series 1.75" width Leaf Springs with spring over axle. This plate has oval bolt holes so it will...
View full detailsThis is a pretty much standard U bolt made to fit a D44 axle. The exception being that they are .625" (5/8) Rolled Threads for extra strength and t...
View full detailsThis is a pretty much standard U bolt made to fit a D30/35 axle. The exception being that they are .625" (5/8) Rolled Threads for extra strength an...
View full detailsINCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 2.5" Width: 2.5" This is one of our fairly basic items, but it isn't quit e that basi...
View full detailsYou will receive: 2 - leaf spring plates for 2.5" springs 2 - perches 2.5" wide 2 - shock brackets 1.5" ID 4 - U-bolts 10"x5/8"x 3" and hardware ...
View full detailsYou will receive: 2 - leaf spring plates for 2.5" springs 1 - perch 2.5" wide 2 - shock brackets 1.5" ID 3 - U-bolts 10"x5/8"x 3" or 2.75" and har...
View full detailsRing and the Cover are 3/8" thick Plate steel cover bent 8 ways Machined absolutely flat for a perfect fit All seams fully welded inside and out ...
View full detailsRing is 1/2" and the cover is 3/8" thick Plate steel cover bent 8 ways Machined absolutely flat for a perfect fit All seams fully welded inside an...
View full detailsCopyright © 2024 Far From Stock .