DIY Dana 60 Kingpin Crossover Steering Kit
Dana 60 kingpin crossover steering kit utilizing hd tie rod ends. This is a DIY kit to switch from the short rearward facing drag link on your Chev...
View full detailsBig Order? No Problem! Financing available through QUADPAY or PAYPAL 0% 6 Months Approval is Quick & Easy.
Don't see what you need? Call 740-939-0073 or LIVE CHAT. 10am-6pm Eastern
Dana 60 kingpin crossover steering kit utilizing hd tie rod ends. This is a DIY kit to switch from the short rearward facing drag link on your Chev...
View full detailsWhen adding a High Angle end in your Drag Link (on our Y-Link kit or crossover kit) you need to increase the diameter of the taper in your pitman ...
View full details1.5 inch o.d. DOM Tubing, .250 (1/4”) wall material thickness. Sold by the foot, from 2-6’.
We have been manufacturing steering kits and components for many many years. Throughout that time we have been repeatedly asked to build a welded k...
View full detailsThis is your not so basic steering setup that uses 7/8" Heims with easier adjustment & much stronger tubing. The kit can be used over or under ...
View full detailsThis cure is for the GM 1 ton Y link steering conversion and is designed around the GM standard 1 ton rod end. Use on any other steering kit is at ...
View full details6 bolt tube clamp for 1.5" outside diameter tube. Made from 1/2" wall chromoly tube and uses 1/4" allen head bolts. Great for mounting ram assist o...
View full details6 bolt tube clamp for 1.25" outside diameter tube. Made from 1/2" wall chromoly tube and uses 1/4" allen head bolts. Great for adding a stabilizer ...
View full detailsCopyright © 2024 Far From Stock .