Click or scroll to zoom
Tap or pinch to zoom
Jeep 2.5" Spring U Bolt Plates
Jeep 2.5" Spring U Bolt Plates

Jeep 2.5" Spring U Bolt Plates

Sale
$100.00
$41.99
This U Bolt retention plate is made for Jeep 2.5" width Leaf Springs and due to the oval bolt holes it will fit an axle from 2.5 to 4" in diameter, so if you upgade axles you won't need new U Bolt Plates. It is also set up for 3 different mounting position options. The ends are bent at a 45 degree angle for additional lateral strength and it is .375" (3/8) thick. It is made from HR P&O Steel Plate. Sold in pairs.

Related products

7/8" DIY Heim Steering Kit (55” Tubing)
$329.31

7/8" DIY Heim Steering Kit (55” Tubing)

This is your not so basic steering setup that uses 7/8" Heims with easier adjustment & much stronger tubing. The kit can be used over or under ...

View full details
The Cure! For Jeep (CJ, YJ, TJ & XJ)
Sale
$999.99
$27.49

The Cure! For Jeep (CJ, YJ, TJ & XJ)

This cure is for the OEM Jeep Y link steering and is designed around the OEM Jeep tie rod end. Use on any other steering kit is at your discretion....

View full details
Shackle Hangers
from $59.99

Shackle Hangers

NOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4 OD OR  MORE THAN 4" These are designed with an offset so you can pull them way b...

View full details
3/4" Heim Steering Kit (55” Tubing)
$315.70

3/4" Heim Steering Kit (55” Tubing)

Before you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...

View full details
DIY Offset Tie Rod Kit
$207.89

DIY Offset Tie Rod Kit

Note: If you are buying this to build your own tie rod  the tubing will need to be cut down.   This is a very nice kit that takes the diameter of a...

View full details

You recently viewed

Clear recently viewed