Click or scroll to zoom
Tap or pinch to zoom
Dana 30 / Dana 35 Spring Perches, 2.5" Wide
Dana 30 / Dana 35 Spring Perches, 2.5" Wide

Dana 30 / Dana 35 Spring Perches, 2.5" Wide

$45.05
    INCLUDES:
  • 2-Perches for one axle
    DIMENSIONS:
  • Axle diameter: 2.5"
  • Width: 2.5"
This is one of our fairly basic items, but it isn't quit e that basic. Here's what you want to know: these are .25" (1/4) HR P&O Steel Plate, CNC Laser Cut and then Folded on a 290 ton CNC Brake to final size. Length is 8.0" to help control axle wrap and 2.5" wide to provide a stable platform. They have 3 spring pin mounting options so you can adjust your wheel base if you wish and are cut to fit a 2.5" axle tube (D30 / D35), they are easily adjustable .25 up or down in tube size in minutes with your grinder. Sold in pairs.
Depending on your D30 one side of the perch will need opened up to 3 3/8 to get around the casting
These are for spring over applications

Related products

7/8" DIY Heim Steering Kit (55” Tubing)
$329.31

7/8" DIY Heim Steering Kit (55” Tubing)

This is your not so basic steering setup that uses 7/8" Heims with easier adjustment & much stronger tubing. The kit can be used over or under ...

View full details
The Cure! For Jeep (CJ, YJ, TJ & XJ)
Sale
$999.99
$27.49

The Cure! For Jeep (CJ, YJ, TJ & XJ)

This cure is for the OEM Jeep Y link steering and is designed around the OEM Jeep tie rod end. Use on any other steering kit is at your discretion....

View full details
Shackle Hangers
from $59.99

Shackle Hangers

NOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4 OD OR  MORE THAN 4" These are designed with an offset so you can pull them way b...

View full details
3/4" Heim Steering Kit (55” Tubing)
$315.70

3/4" Heim Steering Kit (55” Tubing)

Before you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...

View full details
U Bolt, 3 5/8" X 5/8" X 10"
$16.05

U Bolt, 3 5/8" X 5/8" X 10"

These are the bolts you need for the Pumkin side of a D44 and are pretty much standard, The exception being that they are .625" (5/8) rolled thread...

View full details

You recently viewed

Clear recently viewed