Jeep TJ/LJ

This is your not so basic steering setup that uses 7/8" Heims with easier adjustment & much stronger tubing. The kit can be used over or under ...

 Here is something a lot of you guys using a 2005 and newer Ford F250/F350 Superduty Axle will appreciate. This bracket will mount to the factory r...

Before you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...

This weld-on bracket is part of our TJ Axle Swap Kit that adapts the popular Ford 8.8" rear end to the stock suspension mounts in your Jeep Wrangle...

Strengthening the weak passenger side upper control arm bracket can save you time and money from having to replace the entire bracket when it event...

Panhard / Trackbar bracket. It has 3 mounting position options, 5.5", 6'5", & 7.5" from Axle center. They are cut for a 3" axle tube diameter b...

This is the way to make your existing longarm or radius arm kit actually strong enough for trail use! Quite an easy swap but think it through, add ...

The Fox 2.0 Evolution Series IFP steering stabilizer helps take the load off your steering components and keep your tires tracking straight and tru...

We have been manufacturing steering kits and components for many many years. Throughout that time we have been repeatedly asked to build a welded k...

These weld brackets are used to relocate the sway bar mounts on the axle up when lifted. Made from 3/8" thick steel. This bracket will move your sw...

This weld-on bracket is part of our TJ Axle Swap Kit that adapt's the popular Ford 8.8" rear end to the stock suspension mounts in your Jeep Wrangl...

Features Made from 1.5" x .250 wall DOM Steel Bends for clearance of most diff covers Works up to a 4" lift High Angle Drag Link TRE ES2027 7/8" w...

This is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. The kit can be used with s...

This bracket makes it easy to three link a mini truck front axle. This mounts directly on top of the differential allowing your upper link to be on...

We made this 1/4" thick bracket with the factory size mounting hole to fit the upper clevite bushing on most factory TJ, LJ, XJ, ZJ, JK and MJ Jeep...

This gasket is designed for Dana 30 differential cover.

These are a coil bucket replacement for the Jeep TJ running a 3" or larger diameter tube. Our brackets are entirely .25" thick, both the plate and ...

We made this 1/4" thick bracket with the factory size mounting hole to fit the upper clevite bushing on most factory TJ, LJ, XJ, and MJ Jeeps. To ...

This weld-on kit let's you adapt the popular Ford 8.8" rear end to the stock suspension mounts in your Jeep Wrangler, Rubicon TJ! This set is desig...

Rear Upper Control Arms are the ideal replacement for your Jeep factory control arms. Whether you're repairing or correcting your Wrangler's casto...

Front Upper Control Arms are the ideal replacement for your Jeep factory control arms. Whether you're repairing or correcting your Wrangler's casto...

I am sorry it took us so long to get these to market but they correct the many weaknesses in the factory arms with greater strength and performance...