Big Order? No Problem! Financing available through QUADPAY or PAYPAL 0% 6 Months Approval is Quick & Easy.
Don't see what you need? Call 740-939-0073 or LIVE CHAT. 10am-6pm Eastern
This is your not so basic steering setup that uses 7/8" Heims with easier adjustment & much stronger tubing. The kit can be used over or under ...
View full details
Sale
This cure is for the OEM Jeep Y link steering and is designed around the OEM Jeep tie rod end. Use on any other steering kit is at your discretion....
View full details
NOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4 OD OR MORE THAN 4" These are designed with an offset so you can pull them way b...
View full details
Before you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...
View full details
You will receive: 2 - spring under leaf spring plates for 2.5" springs 2 perches for 3", 3.25" or 3.5" axle tube and 2.5" wide 4 U-bolts 8" Long a...
View full details
These are the bolts you need for the Pumkin side of a D44 and are pretty much standard, The exception being that they are .625" (5/8) rolled thread...
View full details
INCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 2.75" Width: 2.0" These Spring Perches are made for Early CJ & M series Jeep widt...
View full details
This is a pretty much our standard U-bolt made for 3" diameter axles, the exception is that they are .625" (5/8) Rolled Threads for extra strength ...
View full details
INCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 3.0"/3.25"/3.5" Width: 2.5" After we started our Desert Racing products I saw an obvi...
View full details
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a S...
View full details
Sale
3/8" Thick Sold Individually These are .375" thick standard shackles. The ends are completely round to avoid any grab points from rocks. They hav...
View full details
This is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. The kit can be used with s...
View full details
This gasket is designed for Dana 30 differential cover.
3/8" Thick Sold Individually These are .375" thick standard shackles. The ends are completely round to avoid any grab points from rocks. They hav...
View full details
This u-Bolt retention plate is made for CJ & M Series 1.75" width Leaf Springs with spring over axle. This plate has oval bolt holes so it will...
View full details
This is a pretty much standard U bolt made to fit a D44 axle. The exception being that they are .625" (5/8) Rolled Threads for extra strength and t...
View full details
This is a pretty much standard U bolt made to fit a D30/35 axle. The exception being that they are .625" (5/8) Rolled Threads for extra strength an...
View full details
INCLUDES: 2-Perches for one axle DIMENSIONS: Axle diameter: 2.5" Width: 2.5" This is one of our fairly basic items, but it isn't quit e that basi...
View full details
You will receive: 2 - leaf spring plates for 2.5" springs 2 - perches 2.5" wide 2 - shock brackets 1.5" ID 4 - U-bolts 10"x5/8"x 3" and hardware ...
View full details
You will receive: 2 - leaf spring plates for 2.5" springs 1 - perch 2.5" wide 2 - shock brackets 1.5" ID 3 - U-bolts 10"x5/8"x 3" or 2.75" and har...
View full details
Ring and the Cover are 3/8" thick Plate steel cover bent 8 ways Machined absolutely flat for a perfect fit All seams fully welded inside and out ...
View full details
Ring is 1/2" and the cover is 3/8" thick Plate steel cover bent 8 ways Machined absolutely flat for a perfect fit All seams fully welded inside an...
View full details