Click or scroll to zoom
Tap or pinch to zoom
U Bolt, 2 1/2" X 5/8" X 10"
U Bolt, 2 1/2" X 5/8" X 10"

U Bolt, 2 1/2" X 5/8" X 10"

$13.09
This is a pretty much standard U bolt made to fit a D30/35 axle. The exception being that they are .625" (5/8) Rolled Threads for extra strength and the threading is 5" long so they will fit. Cut off what you don't need after they are on for a perfect fit! They are also Grade 8. If they fit use them (if they don't fit, drill your plates until they do). All of our U-bolt plates are recommended to use 5/8" U bolts. Comes with Tallnuts and Thick cut 1/4" Washers.

U-Bolts are Sold individually.

Related products

7/8" DIY Heim Steering Kit (55” Tubing)
$329.31

7/8" DIY Heim Steering Kit (55” Tubing)

This is your not so basic steering setup that uses 7/8" Heims with easier adjustment & much stronger tubing. The kit can be used over or under ...

View full details
The Cure! For Jeep (CJ, YJ, TJ & XJ)
Sale
$999.99
$27.49

The Cure! For Jeep (CJ, YJ, TJ & XJ)

This cure is for the OEM Jeep Y link steering and is designed around the OEM Jeep tie rod end. Use on any other steering kit is at your discretion....

View full details
Shackle Hangers
from $59.99

Shackle Hangers

NOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4 OD OR  MORE THAN 4" These are designed with an offset so you can pull them way b...

View full details
3/4" Heim Steering Kit (55” Tubing)
$315.70

3/4" Heim Steering Kit (55” Tubing)

Before you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...

View full details
U Bolt, 3 5/8" X 5/8" X 10"
$16.05

U Bolt, 3 5/8" X 5/8" X 10"

These are the bolts you need for the Pumkin side of a D44 and are pretty much standard, The exception being that they are .625" (5/8) rolled thread...

View full details

You recently viewed

Clear recently viewed