Click or scroll to zoom
Tap or pinch to zoom
FJ60 / Jeep XJ Spring Hangers 3 3/16" Inner Width
FJ60 / Jeep XJ Spring Hangers 3 3/16" Inner Width

FJ60 / Jeep XJ Spring Hangers 3 3/16" Inner Width

$41.80
  • This is a Spring Hanger made for 2.75" Toyota FJ60 leaf springs. The springs are 2.75" wide but the bushings make for an overall ID of just over 3 3/16". It has an additional "ramp" piece for greater rigidity. This particular style hanger can be used to add 1"+ WB when used extending beyond the frame, the spring pin location is aligned with the leading edge of the bracket itself, that can come in handy. We have used them facing front or rearward, the ramp can act as a skid too. 


These also fit the Jeep XJ (Cherokee), they have 2.5" springs but their bushings make them 3 3/16" at the bushing.

Sold in pairs.

Related products

Kit de barra de tracción DIY FFS HD
from $154.99

Kit de barra de tracción DIY FFS HD

¡Todos los kits de barras de tracción tienen precios mejorados, distintivos FFS y hardware incluidos! ¡Más completo y asequible que nunca! Estas pi...

View full details
Heim Joint Boot Pair
from $9.00

Heim Joint Boot Pair

Qty (2) Boot for your 7/8” or 1-1/4" Heim Joint to protect it from salt and brine spread on the roads in the winter. Grease joint heavily when inst...

View full details
FFS Four Wheel Drive Front Spring Hanger Brackets and Shackles
from $128.69

FFS Four Wheel Drive Front Spring Hanger Brackets and Shackles

Have a W150, W250, W350 And the front spring, front bracket, is cracked or rusty?  Is the bushing worn out in the rear bracket?  Are you converting...

View full details
4.0” Axle Link Brackets (Pair)
$58.28

4.0” Axle Link Brackets (Pair)

This is a key component to several kits like traction bars and 4 links when you need a simple way to add a link bracket to the round tube of your h...

View full details
Misalignment Spacers for 7/8” Rod Ends (7/8” i.d. Bore)
from $7.51

Misalignment Spacers for 7/8” Rod Ends (7/8” i.d. Bore)

7/8” heim joint misalignment spacers. These spacers fit the inside rod end diameter of 7/8”. The standard width installed is 2”. That’s what we are...

View full details

You recently viewed

Clear recently viewed