Click or scroll to zoom
Tap or pinch to zoom
Tapered Insert for High Angle Drag Link at pitman
$16.87
When adding a High Angle end in your Drag Link (on our Y-Link kit or crossover kit) you need to increase the diameter of the taper in your pitman arm. Hole must be drilled out to 1". You may need to grind the end with no shoulder down a little bit in order to get a snug fit. These are designed to be welded, preferably in the TIG process due to the small overall size, however MIG welding them is acceptable as well.
the tapered ream tool will do this too
