2nd & 3rd & 4th Gen Dodge Ram DIY Radius Long Arm Links
Bolts, FFS Badges and Caster Eliminator Plates Sold Separately. Add from menu on right.
This is for a pair of Radius Long Arm links to replace your parallel control arms on a 2nd or 3rd or 4th gen ram, or when using a 2nd or 3rd gen front axle under your custom application. Welding required, universal type kit, could be used to transplant these axles under most any frame. These are able to be adjusted for any amount of lift you have or are wanting. All set for 9/16 Hardware (Click link to purchase or add to cart) and 2 Pairs of our for caster eliminators for 94-99 or 00-13 (Click link to purchase or add to cart) to eliminate the slide type caster adjuster that's part of the lower caster adjustment on the axle. With this setup your arm length adjustment is handled by the 1.25” rod end at the frame and the caster adjustment is handled by the upper part of the radius arm and it's 7/8 rod end.
NOT INCLUDED:
9/16 Bolts Nuts Washers (Click on Link Above)
CASTER ELIMATOR PLATES (click on link above)
In this DIY Kit FFS Badges Sold Separately
Correctly adjust welder settings and start your puddle on the tube. (Too much heat will warp the threads)
Do not weld the tube adapter with the rod end threaded inside. (The two pieces cool at different rates and will lock them together)
Wait until everything has completely cooled before threading your rod ends into the adapters
we often get the question, are these greaseable?
