Adjustable Axle Mount Link Tower (DRIVER FRONT)
NOTE: LEFT AND RIGHT (DRIVER AND PASSENGER) IS BASED ON A FRONT END APPLICATION, FOR REAR USE OPPOSITE.These have been a long time coming! They are made entirely out of 1/4" A36 Plate and situated to mount on the axle centered for the largest weld area. What makes them different from others is that the legs are the bent part, this model is set to 10 degrees. They have 3 mounting options so you can set your seperation properly and tune the Squat. Measuring from top of axle tube the mounting holes are at 4", 5.25", 6.5". We believe if you need more seperation than that it should be mounted from a truss to eliminate leverage. There is a seperate piece that is keyed so it is easy to set up to be welded to complete the structure and completely box the bracket.