03-13 3rd / 4th Gen Ram bolt-on 4 link Long Arm
FFS Bolt on Front Long Arm 4 link control arms for your 03-12/13 2500 or 3500 4x4 or 1500 megacab. Replaces your short 4 control arms. Fit trucks from leveled to 10” with ease.
This is a key component selected from our long travel air suspension systems, and in that application would require the upper bar bend for low height clearance, same as if you installed these on a stock to 3” lifted truck.
If installing on a lifted truck of 4” or more without adjustable air suspension, the second bend in the upper bar can be removed for better appearance. Choose available below.
At a whopping 50+” long, these not only locate your front axle very well with great control, but the plentiful length also minimizes any drawback of higher lift heights too.
Stock or extended wheelbase adjustable by means of the monster 1-1/4 heim type rod ends. Helps move the tires away from the rear of the fender opening where rub is the most common. Comes with our caster eliminator insert set to get rid of the original slotted cam style caster adjustment, as this will now be handled by the adjustable upper control arm rod ends.
Chassis bracket locates on your frame with an original frame hole just in front of a body mount but behind your trans crossmember and requires drilling for each frame bracket. Requires removal of your old link brackets on the frame. Easily done. You can see the fresh marks on the frame in the pictures where they were cleaned up.
Matching bolt on rear traction bar frame bracket or complete kit available for a clean symmetrical look.
Powder wrinkle black, raw available on request, custom powder available. FFS removable overlay on the chassis bracket to custom match to your truck.
A great compliment to this would be our steering kit, easily covers lift height range.
2 lower long links,
2 upper long links,
2 frame mount 4 link brackets,
4 caster eliminator plates,
4 1.25 chromoly hardened rod ends w jamb nut and misalignment spacers,
4 axle bushing sets,
2 FFS overlay badge plates
8 9/16 grade 8 pivot fasteners,
1/2” and 7/16 grade 8 frame bracket fasteners,
1/2” thread forming frame bracket bolts.
Installation partially assisted by Tap Flex Structural Fastener Thread Forming Bolt.
*Meets Grade 5 ASTM A449 strength and ductility standards.
*Drill Size 15/32
*Seating Torque 75 ft/lbs
In 1/8” Steel;
Shear strength 4773 lbs
Thread pull-out strength 3668 lbs (doubles with another 1/16” of material thickness)