PICK YOUR COLOR

PRISMATIC
1 23

14- 20 Ram 2500 & 3500 - Heavy-Duty Adjustable Track Bar Kit

14- 20 Ram 2500 & 3500 - Heavy-Duty Adjustable Track Bar Kit

$374.00
$374.00 $410.00

CLICK: SINGLE COAT VS DUAL COAT

When Selecting a Powder Coat Custom Color , Pay attention to the description, it will tell you if you need more than one coat of powder. Dual Stage colors have a silver underbase and are often named Illusion. If you are unsure give us a call and we will help you decide.


Expected delivery date:
13 Jun - Custom Parts can take a bit longer, reach out to us if you need it faster. We will do our best to accommodate your build.

Built to eliminate steering slop and wandering — not just mask it. This monster-strong 1.5" .250 wall DOM tube adjustable track bar replaces the wear-prone factory unit on your 2014–2020 Ram 2500 and 3500. Equipped with 7/8" heim-joint-style rod ends, this kit is engineered for serious durability whether you're running stock height, a 4" level, or a full 10"+ lift setup.

Picking a Color: 

Wrinkle Black and Raw are figured into the price of this part. If you chose a custom color that is single pass you will have a special charge for that and the same goes for Dual pass colors. The 4-10" lift comes with another bracket that has to be installed to achieve the lift which is also powdered. Please add your powder color from prismatic in the form before you hit add to cart. If you have any questions just call in and we would be glad to help. (740) 939-0076

Why This Track Bar?
  • 1.5" .250 Wall DOM Tube — significantly stronger than factory, built to handle off-road abuse and heavy front-end loads.
  • 7/8" Heim Joint Rod Ends — replace the wear-prone OEM-style tie rod ends for tighter, longer-lasting steering feel.
  • Works at Stock Height Through 10"+ of Lift — designed for stock to 4" lifted/leveled trucks out of the box. Add the optional drop bracket (sold separately) for 5"–10"+ lift or adjustable suspension setups like our long travel air kit.
  • Engineered Drop Bracket Design — uses a wider-than-stock mounting width at the rod end for greater misalignment capacity, better differential clearance, and reduced rod-end binding and premature wear.
  • Bump-Steer-Free Travel — when paired with the drop bracket, the system allows full suspension travel without bump steer across the entire driveable height range.
Fitment
  • Track Bar: Fits all 2014–2018 Ram 2500 & 3500. 2019–2020 models require a minor track bar bracket clearance modification.
  • Compatible Models: Includes Mega Cab and Power Wagon.
Installation Notes
  • Requires drilling knuckles to a straight 3/4" hole (reamer tool recommended).
  • Must have original pitman arm and passenger knuckle.
  • Includes mount for stock stabilizer in stock location.
  • Finished in black wrinkle powder coat — custom powder coating options available.
  • Optional rubber boots available separately (recommended for areas with road salt and brine).
  • Options for stabilizer mount upgrades available.
What's Included — Track Bar Kit ONLY
  • Qty (1) — Adjustable Track Bar
  • Qty (1) — Stock Frame Bracket (substitutions listed below for lifted applications using the drop bracket)
  • Qty (2) — 7/8" x 7/8" Left & Right Rod Ends w/ Jam Nuts
  • Qty (4) — 3/4" Narrow Misalignment Spacers (sub two standard-width for lifted drop bracket)
  • Qty (1) — 3/4" x 3" Fine Thread Bolt
  • Qty (1) — 3/4" x 3.5" Fine Thread Bolt (sub one 4" bolt for lifted drop bracket; add one 7/16" x 1-1/4" bolt/nut set and one 1/2" x 1-1/4" bolt, lock washer, and long blind nut)
  • Qty (2) — 3/4" Washers
  • Qty (1) — 3/4" Lock Washer
  • Qty (1) — 3/4" Nylon Nut
  • Qty (1) — 3/4" Blind Nut w/ Tab
⚠️ Important: Lifted Applications With Drop Bracket

When using the drop track bar bracket for a lifted application (5"+ of lift), the drag link flips to the top side of the passenger knuckle. This means stock wheels cannot be used without wheel spacers in that configuration. If you're running under 4" of lift, this does not apply — stock wheels will clear without issue. Always test-fit during install and reach out if you have questions.

Watch the Install Video: YOUTUBE VIDEO HERE

We sell components out of our complete steering system due to customer demand. We cannot ensure compatibility of our components mixed and matched with other suppliers' components. Must have original pitman arm and passenger knuckle.

Note: All products are made to order. Custom-fit items may take longer to ship. For questions about shipping times, please contact us—we’re happy to help.