Click or scroll to zoom
Tap or pinch to zoom
U Bolt, 3" X 5/8" X 10"
U Bolt, 3" X 5/8" X 10"

U Bolt, 3" X 5/8" X 10"

$13.09
This is a pretty much our standard U-bolt made for 3" diameter axles, the exception is that they are .625" (5/8) Rolled Threads for extra strength and the threading is 5" long so they will fit! Cut off what you don't need after they are on, and they are also Grade 8. If they fit use them (if they don't fit drill your plates until they do)! All of our U-bolt plates are recomended to use 5/8" U bolts. Comes with Tallnuts and Thick cut 1/4" Washers. U-Bolts are Sold individually.

Related products

7/8" DIY Heim Steering Kit (55” Tubing)
$329.31

7/8" DIY Heim Steering Kit (55” Tubing)

This is your not so basic steering setup that uses 7/8" heims with easier adjustment & much stronger tubing. The kit can be used over or under ...

View full details
The Cure! For Jeep (CJ, YJ, TJ & XJ)
Sale
$999.99
$27.49

The Cure! For Jeep (CJ, YJ, TJ & XJ)

This cure is for the OEM Jeep Y link steering and is designed around the OEM Jeep tie rod end. Use on any other steering kit is at your discretion....

View full details
3/4" Heim Steering Kit (55” Tubing)
$315.70

3/4" Heim Steering Kit (55” Tubing)

Before you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...

View full details
Shackle Hangers
from $59.99

Shackle Hangers

NOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4 OD OR  MORE THAN 4" These are designed with an offset so you can pull them way b...

View full details
U Bolt, 3 5/8" X 5/8" X 10"
$16.05

U Bolt, 3 5/8" X 5/8" X 10"

These are the bolts you need for the Pumkin side of a D44 and are pretty much standard, The exception being that they are .625" (5/8) rolled thread...

View full details

You recently viewed

Clear recently viewed