Click or scroll to zoom
Tap or pinch to zoom
Early Jeep U-Bolt Plates (CJ & M Series)
Early Jeep U-Bolt Plates (CJ & M Series)

Early Jeep U-Bolt Plates (CJ & M Series)

$44.00
This u-Bolt retention plate is made for CJ & M Series 1.75" width Leaf Springs with spring over axle. This plate has oval bolt holes so it will fit an axle from 2.5 to 3.5" in diameter, so if you upgrade axles you won't need new u-bolt Plates. It's also set up for 3 different mounting position options so wheelbase can be adjusted. The ends are bent at a 45 degree angle for additional lateral strength and is .375" (3/8) thick. These are made from HR P&O Steel Plate. Sold in pairs.

Related products

7/8" DIY Heim Steering Kit (55” Tubing)
$329.31

7/8" DIY Heim Steering Kit (55” Tubing)

This is your not so basic steering setup that uses 7/8" Heims with easier adjustment & much stronger tubing. The kit can be used over or under ...

View full details
The Cure! For Jeep (CJ, YJ, TJ & XJ)
Sale
$999.99
$27.49

The Cure! For Jeep (CJ, YJ, TJ & XJ)

This cure is for the OEM Jeep Y link steering and is designed around the OEM Jeep tie rod end. Use on any other steering kit is at your discretion....

View full details
Shackle Hangers
from $59.99

Shackle Hangers

NOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4 OD OR  MORE THAN 4" These are designed with an offset so you can pull them way b...

View full details
3/4" Heim Steering Kit (55” Tubing)
$315.70

3/4" Heim Steering Kit (55” Tubing)

Before you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...

View full details
U Bolt, 3 5/8" X 5/8" X 10"
$16.05

U Bolt, 3 5/8" X 5/8" X 10"

These are the bolts you need for the Pumkin side of a D44 and are pretty much standard, The exception being that they are .625" (5/8) rolled thread...

View full details

You recently viewed

Clear recently viewed