Click or scroll to zoom
Tap or pinch to zoom
Early Jeep Narrow Width Perches 2" Wide (CJ & M Series)
Click or scroll to zoom
Tap or pinch to zoom
Early Jeep Narrow Width Perches 2" Wide (CJ & M Series)
Early Jeep Narrow Width Perches 2" Wide (CJ & M Series)

Early Jeep Narrow Width Perches 2" Wide (CJ & M Series)

$43.99
    INCLUDES:
  • 2-Perches for one axle
    DIMENSIONS:
  • Axle diameter: 2.75"
  • Width: 2.0"
These Spring Perches are made for Early CJ & M series Jeep width (1.75" - 2.0") Leaf Springs for spring over axle. There is no compromise in their construction, they are just a fraction narrower and have a radius for a 2.75" tube allowing them to be used with 2.5" or larger tubes with ease. They have 3 mounting position options for those of you that want a little more or less wheelbase. These are .25" (1/4) thick HR P&O Steel Plate, CNC Laser cut and CNC 290 ton Brake bent. Sold in pairs.

Related products

7/8" DIY Heim Steering Kit (55” Tubing)
$329.31

7/8" DIY Heim Steering Kit (55” Tubing)

This is your not so basic steering setup that uses 7/8" heims with easier adjustment & much stronger tubing. The kit can be used over or under ...

View full details
The Cure! For Jeep (CJ, YJ, TJ & XJ)
Sale
$999.99
$27.49

The Cure! For Jeep (CJ, YJ, TJ & XJ)

This cure is for the OEM Jeep Y link steering and is designed around the OEM Jeep tie rod end. Use on any other steering kit is at your discretion....

View full details
3/4" Heim Steering Kit (55” Tubing)
$315.70

3/4" Heim Steering Kit (55” Tubing)

Before you take a look at this kit consider something... If you are using High Steer Arms, you should use the 7/8" kit; it is only $10 more an...

View full details
Shackle Hangers
from $59.99

Shackle Hangers

NOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4 OD OR  MORE THAN 4" These are designed with an offset so you can pull them way b...

View full details
U Bolt, 3 5/8" X 5/8" X 10"
$16.05

U Bolt, 3 5/8" X 5/8" X 10"

These are the bolts you need for the Pumkin side of a D44 and are pretty much standard, The exception being that they are .625" (5/8) rolled thread...

View full details

You recently viewed

Clear recently viewed