{"title":"1G 1ST Gen Front Leaf Suspension and Steering","description":"\u003cp\u003eAll the products you need to make the finest leaf spring kingpin Dana 60 Front end out there. \u003c\/p\u003e\n\u003cp\u003eIncluding:\u003c\/p\u003e\n\u003cp\u003eSprings from mild to wild.\u003c\/p\u003e\n\u003cp\u003eShocks from Bilstein and Fox.\u003c\/p\u003e\n\u003cp\u003eSpring Relocation plates to get the front axle centered in the Wheel well.\u003c\/p\u003e\n\u003cp\u003eExtended shackles to get the rear spring eye off the, so the spring works correctly.\u003c\/p\u003e\n\u003cp\u003eKingpin Spring Eliminator cuts down on the knuckle moving around on the kingpins.\u003c\/p\u003e\n\u003cp\u003eCrossover Steering remedies bump steer and sloppiness of the original steering setup.\u003c\/p\u003e\n\u003cp\u003eSteering box brace solves the broken frame and adapter plate woes these trucks experience.\u003c\/p\u003e\n\u003cp\u003eSteering input shaft to eliminate the failure prone factory pot joint.\u003c\/p\u003e\n\u003cp\u003eRebuilt Steering box in a variety of permutations.\u003c\/p\u003e\n\u003cp\u003eSteering stabilizer to reduce road imperfection feedback through the steering wheel.\u003c\/p\u003e","products":[{"product_id":"94-01-dodge-steering-box-rebuild","title":"Dodge Truck Steering Box  (1975-93)","description":"\u003cp\u003e \u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eNew, not rebuilt, 72-93 Dodge Truck Steering Box! 2wd or 4wd Truck or Ramcharger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eThe  option is an over seas sourced new, not refurbished box. 3-1\/3 turns lock to lock. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eThis box is specifically made for 80-93, based on the power steering line type\/thread. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eIf you are working on a 72-79 truck we can help you with steering line conversion. Either adapters or complete upgrade with lines and pump. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eIf you have a 72-74 4x4 you would be switching steering styles altogether because of different mounting and setup. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eIn all applications we recommend one of our steering box braces regardless of the steering arrangement you have.   \u003cbr\u003e\u003cbr\u003e   In all 4wd applications we strongly recommend you switch to one of our crossover kits for a major improvement in steering and handling. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"Better  New box no core no exchange.","offer_id":32415954206780,"sku":"EDELMANN 3016 (ROCK)","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_2b252c18-c6f2-487e-b3d1-be4b03d61b71.png?v=1752092055"},{"product_id":"standard-travel-steering-stabilizer-eyelet-ends-ps-2-0-ifp-10-1in","title":"Fox Steering Stabilizer, Various Generations","description":"\u003cp\u003e\u003cspan\u003eSTANDARD TRAVEL STEERING STABILIZER, EYELET ENDS, PS, 2.0, IFP, 10.1IN\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 2.0 Performance Series IFP steering stabilizer helps take the load off your steering components and keep your tires tracking straight and true. Oversized offroad tires have a tendency to seek out traction in any direction. The large knobs and open tread pattern can cause your front end to wander on or off the road. The 2.0 Performance Series IFP stabilizer uses the same advanced damping technology contained in our Performance Series shocks to tame steering feedback from even the most aggressive tires.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis steering stabilizer can be used on almost any vehicle. This does NOT come with brackets or any mounting hardware.   \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e \u003c\/p\u003e","brand":"Far From Stock - Meyer Distributing","offers":[{"title":"For FFS Steering Kits","offer_id":32539618934844,"sku":"FOX985-24-064  In house fulfill","price":199.95,"currency_code":"USD","in_stock":true},{"title":"4th Gen","offer_id":32539620999228,"sku":"985-24-170 MYR DRP","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_191d8f45-4775-436b-a437-91480c5ee442.jpg?v=1571439433"},{"product_id":"dana-60-heim-crossover","title":"72-93 Dodge Dana 60 Crossover 2” or more lift (heim joint)","description":"\u003cp\u003eThis is the pre-fabbed and wrinkled black powder coated part for adding a bombproof crossover steering kit to your 4x4 dana 60 king pin style front axle (and an optional tie rod) utilizing beefy 7\/8 heim joints instead of traditional tie rod ends.\u003c\/p\u003e\n\u003cp\u003eThis is for your 72-93 dodge truck with 2-6 inches of lift, we have \u003ca href=\"https:\/\/farfromstockstore.com\/products\/no-lift-bolt-on-crossover-steering-72-93-dodge?variant=30108205908028\" target=\"_blank\" rel=\"noopener\"\u003e\u003cb\u003ezero to 1 inch of lift\u003c\/b\u003e\u003c\/a\u003e too. All huge 1.5-inch 1\/4 wall tube. Good looking and stronger than your truck needs.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #ff2a00;\"\u003e*NECESSARY BUT NOT INCLUDED:\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/dropped-pitman-arm-2?_pos=2\u0026amp;_sid=492481899\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003e2” Lift - Pitman Arm\u003c\/a\u003e  \u003c\/b\u003e(Good for 2-3” of lift)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/dropped-pitman-arm-4?_pos=1\u0026amp;_sid=700f89c9a\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003e4” Lift - Pitman Arm\u003c\/a\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/dropped-pitman-arm-4?_pos=1\u0026amp;_sid=700f89c9a\u0026amp;_ss=r\"\u003e\u003c\/a\u003e\u003c\/b\u003e  (Good for 3-6” of lift)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRequires removing the OEM 4WD steering box mounting plate, and shortening the existing steering input shaft or a new, improved u-joint \u003cb\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/1979-93-dodge-truck-steering-shaft-w-u-joint?_pos=1\u0026amp;_sid=8287de133\u0026amp;_ss=r\"\u003esteering input shaft\u003c\/a\u003e to replace the craptacular factory pot joint.\u003c\/b\u003e \u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eA highly recommended option to simplify the steering box relocation and strengthen this application and your trucks frame at its most vulnerable location is our \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/72-93-steering-box-brace?_pos=2\u0026amp;_sid=4f81bf88e\u0026amp;_ss=r\"\u003esteering box brace\u003c\/a\u003e  \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCrossover Includes:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/farfromstockstore.com\/products\/ruffstuff-specialties-passenger-side-dana-60-high-steer-arm?_pos=4\u0026amp;_sid=dd39368e8\u0026amp;_ss=r\"\u003e\u003cb\u003eDana 60 High Steer Arm\u003c\/b\u003e\u003c\/a\u003e and Stud Kit w tapered nuts\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCrossover Drag link, bent and welded -1.5\" X .25\" wall DOM tubing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLoaded set of RH \u0026amp; LH 7\/8 Heim with 3\/4 steering\/safety misalignments\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3\/4” mounting bolts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eCrossover with Tie Rod adds;\u003c\/li\u003e\n\u003cli\u003eTie rod, welded -\u003cspan\u003e1.5\" X .25\" wall DOM tubing\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoaded set of LH \u0026amp; LH 7\/8 Heim with 3\/4 tie rod misalignments \u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3\/4 mounting bolts (requires drilling your knuckles out to 3\/4” straight)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*Crossover steering necessitates sway bar removal. \u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA great option at this time would be our \u003cstrong\u003edana 60 steering stabilizer setup\u003c\/strong\u003e \u003ca href=\"https:\/\/farfromstockstore.com\/products\/dana-60-steering-stabilizer\" target=\"_blank\" rel=\"noopener\"\u003eCLICK HERE\u003c\/a\u003e Buy selecting the proper kit, the tie rod mount can be integrated as a weld in fitting in the tie rod.\u003c\/p\u003e\n\u003cp\u003e Due to the race type application heim joints, even though they are stronger than anything else available and are safe enough for racers, this should be considered an off road part. The only issue we ever face with these rod ends is rust from salt or brine. If you drive in winter weather with those conditions consider a coat of heavy grease or our \u003ca href=\"https:\/\/farfromstockstore.com\/products\/heim-joint-boots?variant=39402783899708\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003erubber boot kit\u003c\/strong\u003e\u003c\/a\u003e for the season or they will rust. We have them on trucks that don’t see salt but do see regular road use for years and look and perform well. Even in good climate conditions, spray regularly with a penetrant\/lubricant to keep happy, quiet and long lasting. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"Crossover Kit w\/ Tie Rod","offer_id":29543703511100,"sku":"+2 heim drag link(x1), 1g heim tie rod (x1), 4”x3\/4 bolt (x4), washer (x4), lock nut (x4), bin 78-4 (x2), bin 78-6 (x2), bin 78-10 (x4),bin 78-11 (x2), bin 78-12 (x2) , bin 2-34 (x1), bin 2-30 (x1)","price":995.0,"currency_code":"USD","in_stock":true},{"title":"CrossOver Kit w\/o Tie Rod","offer_id":29614860042300,"sku":"+2 heim drag link (x1), 4”x3\/4 bolt (x2), washer (x2), lock nut (x2), bin 78-4 (x1), bin 78-6 (x1), bin 78-11 (x2), bin 78-12 (x2) , bin 2-34 (x1), bin 2-30 (x1)","price":655.0,"currency_code":"USD","in_stock":true},{"title":"Crossover Kit w\/ Tie Rod w\/ Stabilizer Mount Bolt hole (DOES NOT INCLUDE STABILIZER OR AXLE SIDE MOUNT)","offer_id":31956949794876,"sku":"+2 heim drag link, black 1g heim tie rod w\/ stab (x1), 4”x3\/4 bolt (x4), washer (x4), lock nut (x4), bin 78-4 (x2), bin 78-6 (x2), bin 78-10 (x4),bin 78-11 (x2), bin 78-12 (x2) , bin 2-34 (x1), bin 2-30 (x1)","price":1093.0,"currency_code":"USD","in_stock":true},{"title":"Loaded Drag Link Only ( THIS IS NOT A CROSSOVER STEERING KIT)","offer_id":32734757388348,"sku":"","price":424.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Single Color Drag link only MUST HAVE A KIT IN THE CART ALSO","offer_id":48229518999857,"sku":"","price":72.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder Single Color drag link and tie rod. MUST HAVE A KIT IN THE CART ALSO","offer_id":48229520179505,"sku":"","price":146.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_2e245604-df26-42e8-b47a-067daf428163.jpg?v=1685362994"},{"product_id":"dana-60-king-pin-spring-eliminator-kit","title":"Dana 60 Kingpin Spring Eliminator Kit","description":"\u003ch2\u003e\n\u003cstrong\u003eDana 60 Kingpin Spring Eliminator Kit is designed to eliminate the Kingpin Springs on the top of any Kingpin Dana 60 axle.\u003c\/strong\u003e \u003c\/h2\u003e\n\u003cp align=\"center\"\u003e\u003cspan\u003eWe placed heavy durometer bushings in the place of the weak springs that were designed for use with OEM wheels and tire weights. When upgrading wheels and tires on a Dana 60 axle, the stock king pin springs compress too much causing damage to the existing bushings and other king pin parts. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cspan\u003eBy removing the kingpin spring entirely from the axle and creating a much tighter fitment with the  Kingpin Spring Eliminator Kit, you instantly upgrade your Dana 60 to handle a bigger tires and wheel weight while providing much greater longevity for your axle components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eOur kit works in ANY Dana 60 kingpin axle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp align=\"center\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eIf you are currently running a setup with the spring, you can use this kit with any Dana 60 knuckle and high steer arm.\u003c\/span\u003e\u003c\/p\u003e","brand":"Far from stock crane axle","offers":[{"title":"Kingpin Spring Eliminator","offer_id":32632574312508,"sku":"","price":97.0,"currency_code":"USD","in_stock":true},{"title":"Dana 60 King Pin Lower Bearing and Seal Rebuild Kit (two needed)","offer_id":32632576507964,"sku":"DANA 706395X Spicer (rock)","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_9a07530b-9d01-495d-8206-5cd124527f29.jpg?v=1600870045"},{"product_id":"72-93-steering-box-brace","title":"72-93 (4x4 CROSSOVER) Dodge Steering Box Brace \u0026 2WD","description":"\u003cp\u003e    \u003cspan class=\"s1\"\u003eThe best steering box brace for dodge ram trucks from 72-93 with either \u003c\/span\u003e\u003cspan class=\"s2\"\u003econverted 4x4 crossover steering, or stock 2wd\u003c\/span\u003e\u003cspan class=\"s1\"\u003e. \u003cbr\u003e   This is the strongest bolt on first gen steering box brace ever! Want to weld it on? No problem, just request no-powder, it’s designed to weld in easily if you want, no need though. \u003cbr\u003e   Designed to bolt on with 7 7\/16 bolts and one 3\/8 bolt and is strong as an ox. Generally mimics an oem 2wd box brace but on steroids. Perfect for your stock 2wd, or \u003c\/span\u003e\u003cspan class=\"s3\"\u003elifted 4x4\u003c\/span\u003e\u003cspan class=\"s1\"\u003e with \u003ca href=\"https:\/\/farfromstockstore.com\/collections\/chassis\/products\/dana-60-heim-crossover?variant=29614860042300\"\u003e\u003cspan class=\"s2\"\u003ecrossover steering kit\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003e, \u003c\/span\u003e\u003cspan class=\"s1\"\u003eor \u003c\/span\u003e\u003cspan class=\"s3\"\u003estock height 4x4\u003c\/span\u003e\u003cspan class=\"s1\"\u003e with our \u003cspan class=\"s2\"\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/no-lift-bolt-on-crossover-steering-72-93-dodge?variant=30191295365180\"\u003eno-lift crossover system\u003c\/a\u003e. \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e   (Not for your \u003c\/span\u003e\u003cspan class=\"s2\"\u003eSTOCK \u003c\/span\u003e\u003cspan class=\"s1\"\u003e4x4 with box mounted in stock location on the original adapter plate with fore\/aft drag link,  for that, \u003ca href=\"https:\/\/farfromstockstore.com\/products\/72-93-4x4-steering-box-brace\"\u003e\u003cspan class=\"s2\"\u003eclick here\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003e ). \u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e   Choice to separate the outer parts (wing plates) if you just want to do half the solution and on a tight budget, but designed as a set to compliment each other. Still an improvement but not nearly as good as the package.    \u003cbr\u003e   Available powdered black, with all hardware. All of this is a perfect compliment to our \u003ca href=\"https:\/\/www.farfromstockstore.com\/products\/94-01-dodge-steering-box-rebuild\"\u003e\u003cspan class=\"s2\"\u003ebuilt steering box\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003e .\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eOption 1- steering box brace set, wrinkle black powdered, with hardware.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eOption 2- just the outer “wing” plates, no hardware,  wrinkle black powdered. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e   You can request product Raw.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e    Custom Powder (Call for Quote)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e(will not fit under early gas radiators that drop down into the frame crossmember. the main plate works but the gusset arm is too tall  it can be cut off for a huge improvement without it, or if it’s important to you, email requesting a custom brace)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e   \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"72-93 (4x4 CROSSOVER) Dodge Steering Box Brace \u0026 2WD","offer_id":22324870250556,"sku":"10061 P701","price":509.0,"currency_code":"USD","in_stock":true},{"title":"Wing Plates Only wrinkle black powdered THIS IS NOT THE WHOLE BRACE THIS IS NOT THE WHOLE BRACE","offer_id":31782346948668,"sku":"10076","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/1F904320-22C6-4925-8B76-AA8CC581A83A.png?v=1716835129"},{"product_id":"custom-shackles","title":"Front Lift Shackles 72-93 Dodge 4x4","description":"\u003cp\u003e   Now NEW and EXTRA Heavy Duty with internal H gusset bolt! \u003cbr\u003e(Old non H design blowout sale while supplies last!)\u003cbr\u003e   Front Heavy Duty swing shackles. +1” or +2” longer over stock length. Super heavy duty 3\/8 shackles for the rear of the front leaf springs on your 72-93 Dodge Ram truck, or any similar 2.5” wide leaf spring. \u003cbr\u003e   Sold in pairs. \u003cbr\u003e   With the additional arc of aftermarket lifted leaf springs, the spring itself can easily contact the frame on compression. Often there is a witness mark on the frame. (But the big clunk noise is also a pretty good indicator) These will let your springs move more freely and without the clunk contact. \u003cbr\u003e   These extended shackles add .5” or 1” of lift to your truck depending on choice when used alone, or +1” or +2” when used in conjunction with our \u003ca href=\"https:\/\/farfromstockstore.com\/products\/ffs-front-spring-brackets-and-shackles-new?_pos=2\u0026amp;_sid=8a6a77b4f\u0026amp;_ss=r\u0026amp;variant=40243047235644\"\u003eFront Spring Hanger Set\u003c\/a\u003e (click)\u003c\/p\u003e\n\u003cp\u003e Choose +1 inch longer than stock (.5” lift), or 2” longer than stock (1” lift), or add the above mentioned hangers for the full amount of increased lift  \u003c\/p\u003e\n\u003cp\u003e   We like to recommend these as a way to regain lift if some is lost due to removal of the bottom one or two leaf springs in your lifted spring pack to improve the ride feel. \u003cbr\u003e   Add these as well as our offset spring plate (1\/4” lift) when removing the “bad idea” pinion shim for much better and appropriate positive caster for improved steering feel and handling! \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"1” extended shackle (.5” lift) Pair","offer_id":29392433643580,"sku":"P707","price":242.0,"currency_code":"USD","in_stock":true},{"title":"2” extended shackle (1” lift) Pair","offer_id":30219128504380,"sku":"P707","price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/C0640D2A-1D51-4DE6-BAE5-2052A048D5C4.jpg?v=1755791802"},{"product_id":"borgeson-000940-telescopic-steel-steering-shaft-for-1979-1993-dodge-trucks","title":"Borgeson Telescopic Steel Steering Input Shaft for 1979-1993 Dodge Trucks","description":"\u003cp\u003e\u003cspan\u003eBorgeson Telescopic Steel Steering Shaft for 1979-1993 Dodge Trucks. Connects from factory column to steering box. Rag joint flange to h-d steering u-joint.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eHeavy Duty Telescopic Design\u003cbr\u003eBillet Steel Universal Joints\u003c\/p\u003e\n\u003cp\u003eWant an extreme duty version? \u003ca href=\"https:\/\/farfromstockstore.com\/products\/79-93-dodge-truck-telescopic-steering-shaft-2-u-joints\"\u003e\u003cb\u003eClick Here\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Far From Stock - borgeson","offers":[{"title":"Default Title","offer_id":29392823877692,"sku":"000940 direct from Borgeson","price":235.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_54e1d67a-add6-4712-98a6-bfc934147aa0.jpg?v=1582554641"},{"product_id":"4-fox-shocks","title":"Fox Shocks 2.0 Performance Series With reservoirs 1G  1St Gen Front and Rear Various Lifts","description":"\u003cp\u003e\u003cspan\u003eSold Pairs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFox Shocks 2.0 Performance Series Reservoir Smooth Body Shocks are a high performance shock providing you the experience of enhanced ride quality and the control you desire. The external reservoir provides increased oil and nitrogen capacity and provides a solid and predictable ride quality capable of handling a variety of terrain ranging from normal to brutal. Clamps included. \u003c\/span\u003e\u003c\/p\u003e","brand":"Far From Stock - Meyer Distributing","offers":[{"title":"4WD rear","offer_id":32592466346044,"sku":"985-24-053  TRN14","price":672.0,"currency_code":"USD","in_stock":true},{"title":"2WD Rear","offer_id":32592467722300,"sku":"985-26-051 TRN14","price":913.0,"currency_code":"USD","in_stock":true},{"title":"4WD Front4\" lift","offer_id":39306835984444,"sku":"985-24-052 (Turn 14)","price":669.95,"currency_code":"USD","in_stock":true},{"title":"10\" lift Front","offer_id":51871832506673,"sku":"fox981-20-122 (T14)","price":640.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/FOX980-24-968.jpg?v=1579137487"},{"product_id":"fox-2-0-shocks-no-reservoir","title":"Fox 2.0 Shocks No Reservoir Stock and Lifted 4WD 1St Gen 1G 72-93","description":"\u003ch3\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003eFox 2.0 Shocks No Reservoir Sold Individually\u003c\/h3\u003e\n\u003ch2\u003e\u003cspan\u003eTHIS ITEM NOT A BOLT ON. WILL REQUIRE MOUNTING BUSHING MODIFICATIONS OR CHANGING MOUNTING POINTS TO 1\/2\"\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"medium-6 columns acespies-specs\"\u003e\n\u003cp\u003e\u003cb\u003eThe Performance Series 2.0 IFP smooth body shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe precision metal impact aluminum body increases cooling capacity and will never rust. Inside you will find our race-proven performance valving technology Our Internal Floating Piston (IFP) mono-tube design separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration allowing maximum performance from the factory-tuned precision valving. The race developed high flow damping piston matched with application specific valving provides the Performance Series 2.0 IFP shock a predicable ride quality capable of handling the roughest road conditions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003ctable class=\"family-specs\"\u003e\n\u003ctbody\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eBody\u003c\/th\u003e\n\u003ctd\u003e2.0\" impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eBody Plating\u003c\/th\u003e\n\u003ctd\u003eHard-anodized for a durable finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eReservoir\u003c\/th\u003e\n\u003ctd\u003eInternal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eComponents\u003c\/th\u003e\n\u003ctd\u003eBlack-anodized, CNC-machined 6061-T6 billet aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eShaft\u003c\/th\u003e\n\u003ctd\u003e5\/8\" hard chrome plated heat-treated alloy steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003ePiston\u003c\/th\u003e\n\u003ctd\u003eRace-developed high-flow piston design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eValving\u003c\/th\u003e\n\u003ctd\u003eApplication specific valving to maximize performance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eSeals\u003c\/th\u003e\n\u003ctd\u003eRedundant sealing pack system main seal, wiper seal, scraper seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eOil\u003c\/th\u003e\n\u003ctd\u003eJM92 Advanced Suspension Fluid for improved performance at variable temperatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eBushings\u003c\/th\u003e\n\u003ctd\u003eQuiet nitrile rubber allows for increased suspension articulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003cth scope=\"row\"\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eDirect replacement for stock and aftermarket lifts kits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Far From Stock","offers":[{"title":"Stock Height Front","offer_id":32543678529596,"sku":"985-24-004 MYR","price":255.0,"currency_code":"USD","in_stock":true},{"title":"Stock Height Rear","offer_id":32543679742012,"sku":"985-24-068 MYR","price":255.0,"currency_code":"USD","in_stock":true},{"title":"2-4\" lift front","offer_id":32543680561212,"sku":"985-24-005 MYR","price":255.0,"currency_code":"USD","in_stock":true},{"title":"2-4\" Lift Rear","offer_id":32543681445948,"sku":"985-24-007 MYR","price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_bae2d453-fa2e-4941-926c-4341812d334f.jpg?v=1571439458"},{"product_id":"1979-93-dodge-truck-steering-shaft-w-u-joint","title":"1979-93 Dodge Truck Steering Input Shaft w\/U-Joint","description":"\u003cp\u003e\u003cspan\u003e1979-93 Dodge Truck Heavy Duty Steering Input Shaft w\/ U-Joint \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2 Wheel Drive \u0026amp; 4 Wheel Drive Applications \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eD150 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eD250 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eD350 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eW150 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eW250 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eW350 \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRamcharger \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ewant our top of the line version? \u003ca href=\"https:\/\/farfromstockstore.com\/products\/borgeson-000940-telescopic-steel-steering-shaft-for-1979-1993-dodge-trucks\"\u003e\u003cb\u003eClick here\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"Default Title","offer_id":29543542882364,"sku":"EBY","price":258.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_ee1947ff-d0b5-4b8c-82a2-5a00b2b1e9c6.jpg?v=1571439458"},{"product_id":"1972-93-dana-60-steering-stabilizer-kit","title":"1972-93 Dodge Dana 60 Steering Stabilizer Kit","description":"\u003cp\u003eDitch the brackets and stabilizer available for these trucks from the 80’s! Get a high performance, clean and good looking steering stabilizer setup. We have custom brackets at each end with options.\u003c\/p\u003e\n\u003cp\u003eThis listing includes:\u003c\/p\u003e\n\u003cp\u003e1) a laser cut and fabricated bridge bracket that goes over your stock dana 60 diff cover,\u003c\/p\u003e\n\u003cp\u003e2)a Fox Stabilizer shock\u003c\/p\u003e\n\u003cp\u003e3) and a choice of tie rod brackets that best fits your truck.\u003c\/p\u003e\n\u003cp\u003eThose 2 choices are either;\u003cbr\u003e1.25 diameter clamp for your stock tie rod, \u003cbr\u003e1.5” clamp for your aftermarket HD tie rod.\u003c\/p\u003e\n\u003cp\u003eHardware:\u003c\/p\u003e\n\u003cp\u003eQty 1 - 1\/2” x 3” Fine Thread Bolt \/ Nut \/ Spacer \u003c\/p\u003e\n\u003cp\u003eQty 1 - 1\/2” x 2.5” Bolt \/ Nut \/ Washer \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eOptions at the axle end mount are a bridge over the diff cover, or an \u003ca href=\"https:\/\/farfromstockstore.com\/products\/dana-60-steering-stabilizer?_pos=1\u0026amp;_sid=35a939d7f\u0026amp;_ss=r\"\u003e\u003cb\u003eintegrated mount on an aftermarket cover\u003c\/b\u003e\u003c\/a\u003e. \u003cbr\u003e(available as heim joint tie rod or tie rod end tie rod)\u003cbr\u003eor a complete \u003ca href=\"https:\/\/farfromstockstore.com\/products\/72-93-dodge-hd-tie-rod?_pos=1\u0026amp;_sid=3ef1d5064\u0026amp;_ss=r\"\u003e\u003cb\u003e1.5” heim or standard tie rod\u003c\/b\u003e\u003c\/a\u003e with an integrated threaded insert for the stabilizer. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"1.25\" - Stock Tie Rod Fox","offer_id":31776843792444,"sku":"1.25” clamp with 2” fine 1\/2” bolt. dana 60 bridge with 2.5” course 1\/2” bolt, nylon nut and single flat washer.  FOX985-24-064","price":526.0,"currency_code":"USD","in_stock":true},{"title":"1.5\" - HD Tie Rod Fox","offer_id":31776843825212,"sku":"1.5” clamp with 3” fine 1\/2” bolt, and 3\/4” spacer. dana 60 bridge with 2.5” course 1\/2” bolt, nylon nut and single flat washer.  FOX985-24-064","price":526.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/74BD2C83-4E97-4285-AA85-1C6D97B0E658.png?v=1716463502"},{"product_id":"4-front-cummins-lift-springs-71-93","title":"4”  first gen dodge lift spring 72-93","description":"\u003ch2\u003e\n\u003cspan\u003eYou will also need to purchase \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/skyjacker-se12d-front-softride-spring-bushing-kit?_pos=1\u0026amp;_sid=b32b62303\u0026amp;_ss=r\"\u003ebushings\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e for these springs.\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eChoose 4 Inch front lift leaf spring pair only (no additional components) for a 72-93 w250 or w350 (even a w150 frame) 1st gen dodge with a cummins engine. Or a gas v8.\u003c\/p\u003e\n\u003cp\u003eYou may want this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/dodge-front-dana-60-ubolt-kit?_pos=4\u0026amp;_sid=1ae0af564\u0026amp;_ss=r\"\u003e\u003cb\u003eu-bolt kit\u003c\/b\u003e\u003c\/a\u003e for a dana 60 as well as this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/axle-spring-offset-plate?_pos=4\u0026amp;_sid=186fa528f\u0026amp;_ss=r\"\u003e\u003cb\u003eoffset plate\u003c\/b\u003e\u003c\/a\u003e or this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/custom-shackles?_pos=1\u0026amp;_sid=ac1556e14\u0026amp;_ss=r\"\u003e\u003cb\u003eshackle set\u003c\/b\u003e\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003eWe suggest a couple mods to this leaf pack for performance and fit depending on your application. Call us after your purchase for suggestions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIF YOU LOCATED ANYWHERE OUTSIDE OF THE LOWER 48 States please give us a call for a shipping quote 740.939.0073 \u003c\/strong\u003e\u003c\/p\u003e","brand":"Far From Stock - Meyer Distributing","offers":[{"title":"Gas 4” (3-4”)","offer_id":29686445342780,"sku":"d400s pair stock item","price":531.0,"currency_code":"USD","in_stock":true},{"title":"Diesel 4”","offer_id":29686475948092,"sku":"d400cs pair stock item","price":578.0,"currency_code":"USD","in_stock":true},{"title":"Rear 4\"","offer_id":32442737983548,"sku":"DR40S Meyer","price":729.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_3cf889ff-4cc7-43b9-8ee2-4d00df8cf228.jpg?v=1571439458"},{"product_id":"dana-60-steering-stabilizer","title":"1972-93 Dodge Dana 60 Steering Stabilizer Kit Options","description":"\u003cp\u003e   These are the parts you need to choose from to add a good looking high performance steering stabilizer kit to your first gen Dodge or square body Chevy with a front dana 60. (Pics will help explain your options, the first 3 really show all versions) Since there are several options we will make this a list of items that you can choose from to make your kit.\u003c\/p\u003e\n\u003cp\u003eFor a complete kit you will need one each of the two items shown below, and also a stabilizer shock  \u003c\/p\u003e\n\u003cp\u003e  \u003cb\u003eAxle End Mounting Bracket\u003c\/b\u003e (2 choices,  a bracket over your existing differential cover, or complete  fabricated differential  cover with integral mounting tab,  these will come with the hardware to mount themselves.\u003c\/p\u003e\n\u003cp\u003e   \u003cb\u003eTie Rod End Mount\u003c\/b\u003e (4 choices), Choose from a clamp for your stock 1.25” tie rod, or a clamp for your aftermarket 1.5” tie rod, or a completely new 1.5” .250\" wall tie rod that already has the stabilizer mount welded in. It will either have standard tie rod ends or heim joint style rod ends.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eSelect separately the actual damping shock\u003c\/strong\u003e;\u003c\/h3\u003e\n\u003cp\u003e \u003cb\u003eStabilizer Shock\u003c\/b\u003e : click here for \u003cb\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/standard-travel-steering-stabilizer-eyelet-ends-ps-2-0-ifp-10-1in?_pos=5\u0026amp;_sid=bf7e5baaf\u0026amp;_ss=r\"\u003eFox\u003c\/a\u003e,\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"1.5” Clamp for Tie Rod","offer_id":30111025135676,"sku":"r1697 RSS with 2-3\/4”x1\/2” bolt and 3\/4” spacer","price":59.0,"currency_code":"USD","in_stock":true},{"title":"1.25 Clamp for Tie Rod","offer_id":30111084576828,"sku":"ebay 1.25 tube clamp modified here with 3” 1\/2”bolt and 3\/4” spacer","price":59.0,"currency_code":"USD","in_stock":true},{"title":"FOX Stabilizer Shock.","offer_id":48186501497137,"sku":"","price":199.95,"currency_code":"USD","in_stock":true},{"title":"Axle bracket MOUNT over diff cover (may not fit aftermarket covers)","offer_id":30111149129788,"sku":"ffs laser dana60s with Qty1- 1\/2” x 2.5” bolt\/nut\/washer","price":219.0,"currency_code":"USD","in_stock":true},{"title":"FFS\/RS Diff Cover w\/ MOUNT","offer_id":30111168921660,"sku":"rss d6070cov + stab-flt  FarFromStock keeps in stock and 2.5” bolt\/nut set no washer","price":321.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder SINGLE Color Surcharge the your cover. or rie rod","offer_id":48186494714161,"sku":"","price":72.0,"currency_code":"USD","in_stock":true},{"title":"Double Coat Powder Surcharge, Illusion Colors, Faux Chrome, Etc -For your cover or tie rod","offer_id":48186508771633,"sku":"","price":122.0,"currency_code":"USD","in_stock":true},{"title":"Tie Rod w stabilizer mount tie rod ends","offer_id":30111445844028,"sku":"2- ES2010 \u0026 Jam Nuts), 1g tie tre with bung and with 3” bolt\/3\/4” spacer","price":321.0,"currency_code":"USD","in_stock":true},{"title":"Tie Rod w stabilizer mount with heim joint ends","offer_id":30111436013628,"sku":"1g tie heim with bung, heims and tie misalignments and with 3” bolt and 3\/4” spacer","price":284.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_e73dec59-95e5-48de-8b7d-c82e7ff14979.jpg?v=1571439459"},{"product_id":"no-lift-bolt-on-crossover-steering-72-93-dodge","title":"72-93 Dodge Dana 60 Crossover 0-2\" lift","description":"\u003cp\u003eAfter years of hearing people say you can’t do a  crossover steering conversion (best upgrade you can do for your old dodge steering\/handling) to a 4x4 of \u003ci\u003estock height\u003c\/i\u003e, we decided to make our own because it definitely can be done.\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cspan\u003epre-fabbed and powdered part to add crossover (with option for a new tie rod too) steering to your stock height or low lift 72-93 dodge.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThis is shown mocked on a stock height ramcharger with original 1\/2 ton 3 leaf negative arched sagging old springs on a kingpin 60. (The dana 44 with a high steer arm would be just fine too.) It fits well with the bump stop making contact before the sector shaft or rod end bolt with the leaf. This is definitely the extreme application and if it were the intended use, there is room to increase that necessary clearance, but most often the intended use is a 3\/4 or 1 ton truck that originally came with the dana 60 and does have slightly taller leaf springs so this demonstrates plenty of room. \u003c\/p\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003cp\u003eThis is a fully welded and black wrinkle powdered kit that can be put on your dodge in short order. \u003c\/p\u003e\n\u003cp\u003e Unfortunately, crossover steering necessitates sway bar removal. You wont miss it.\u003c\/p\u003e\n\u003ch2\u003eIncludes drag link, pitman arm, steer arm, and all attaching hardware.\u003c\/h2\u003e\n\u003cp\u003eThe other part of doing a dana 60 crossover ,would be;\u003c\/p\u003e\n\u003ch3\u003eRequires removing the OEM 4WD steering box mounting plate, and shortening the existing steering input shaft or a new, improved u-joint \u003cb\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/1979-93-dodge-truck-steering-shaft-w-u-joint?_pos=1\u0026amp;_sid=8287de133\u0026amp;_ss=r\"\u003esteering input shaft\u003c\/a\u003e to replace the craptacular factory pot joint.\u003c\/b\u003e \u003c\/h3\u003e\n\u003ch3\u003e\n\u003cem\u003e \u003c\/em\u003e(we always recommend our \u003ca href=\"https:\/\/farfromstockstore.com\/products\/72-93-steering-box-brace?_pos=2\u0026amp;_sid=31364cd28\u0026amp;_ss=r\"\u003e\u003cb\u003esteering box brace\u003c\/b\u003e\u003c\/a\u003e, \u003c\/h3\u003e\n\u003cp\u003eNylon lock nut included for steering arm axle end, be sure to Loctite the threads on the pitman arm end  \u003c\/p\u003e\n\u003cp\u003eIf doing a dana 44 we would need to get you an additional machined flat top knuckle to bolt the high steer arm to  \u003c\/p\u003e\n\u003cp\u003eThis setup will solve your zero lift crossover issues and with work well with our +1” and +2” lift leaf springs too. \u003c\/p\u003e\n\u003cp\u003eAdd our \u003ca href=\"https:\/\/farfromstockstore.com\/products\/72-93-dodge-hd-tie-rod?_pos=1\u0026amp;_sid=4a88793f4\u0026amp;_ss=r\"\u003e\u003cb\u003etie rod kit\u003c\/b\u003e\u003c\/a\u003e to completely upgrade your existing steering with 1.5” .250 wall super heavy duty tubing. Either in standard tie rod end or hd heim joint style rod ends. Available with \u003ca href=\"https:\/\/farfromstockstore.com\/products\/dana-60-steering-stabilizer\"\u003e\u003cb\u003esteering stabilizer and options\u003c\/b\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDue to the race type application heim joints, even though they are stronger than anything else available and are safe enough for racers, this should be considered an off road part. The only issue we ever face with these rod ends is rust from salt or brine. If you drive in winter weather with those conditions consider a coat of heavy grease or our rubber boot kits for the season or they will rust. It will still work fine but will look bad. We have them on trucks that don’t see salt but do see regular road use for years and look and perform well. Even in good climate conditions, spray regularly with a penetrant\/lubricant to keep happy, quiet and long lasting. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions Asked:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHello, I have a 2008 dodge ram 2500 low miles no accidents never plows never sees winter and j barely drive it lol bit it chewa thru stock tie rods annually and \"better quality\" ones about the same. It does have 13.5 wide tires that I'm sure aid in killing the tie rods so I'm looking for a fix to end my yearly tie rod and alignment payments. Looking at your heim set up with track bar. What is the warranty on the heim ends? How much are replacement heim ends for when im out of warranty ? Just cause I'm a nervous Nelly on drilling my knuckles out, do you or know anyone that sells sleeves to go into the drilled hole to go back tapered God forbid this don't work out? Thank you for your time and look forward to hearing from you!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAnswer: \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eI like your question. You are absolutely correct, replacement tie rod ends are garbage, and “lifetime” only means they are willing to give you another set free later. One good pothole later and the are damaged. (We experience the exact same with ball joints but have great solutions for that too!) Not only are they bad ends, but replacement parts, even from “fancy” companies, still use stock geometry, which ties them to the lousy-by-design T style steering that has bad response built in. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur system reduces or completely eliminates bump steer. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf properly installed (no binding throughout steering\/suspension cycle, and occasionally sprayed with a penetrant\/lubricant, we would expect our rod ends to last for many years. I am currently driving 5 year old steering on the 15 ram I am driving, no reason to replace. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe entire rod end and hardware set for replacement is only $135 retail, but with a previous purchase, we will discount that further if needed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eI have considered making a return to stock insert set, but never have because other than a lack of ability to set it up properly, there would not be any customers who want it. It would be an exercise in customer comfort and we are so busy it would not happen. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe have had customers who wish to return to stock, but only based on frustration of an incompetent shop or maybe their own. Any situation like this could be solved with an hour and 3 wrenches. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eI would never consider anything less. Easy drill, easy setup, and ultimately I would suggest you become the alignment shop too, very simple for a live axle truck. (We can help)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"72-93 Dodge Dana 60 Crossover NO LIFT Crossover w\/o Tie Rod","offer_id":30108205908028,"sku":"black 1g no lift drag link (x1), 4”x3\/4 bolt (x1), 3.25”x3\/4 boltwJamNut (x1), washer (x1), lock nut (x1), bin 78-4 (x1), bin 78-6 (x1), bin 78-11 (x2), bin 78-12 (x2), bin 2-34 (x1), bin 2-30 (x1), bin 2-33 (x1)","price":735.0,"currency_code":"USD","in_stock":true},{"title":"With Heim Tie Rod","offer_id":30191295365180,"sku":"blk 1g no lift drag link (x1), blk 1g heim tie rod (x1), 4”x3\/4 bolt (x3), 3.25”x3\/4 bolt w\/Jam Nut (x1), washer (x3), lock nut (x3), bin 78-4 (x2), bin 78-6 (x2), bin 78-10 (x4),bin 78-11 (x2), bin 78-12 (x2) , bin 2-34 (x1), bin 2-30 (x1), 2-33 (x1)","price":1142.0,"currency_code":"USD","in_stock":true},{"title":"With Heim Tie Rod and stabilizer mount","offer_id":30191391178812,"sku":"Blk 1g no lift drag link (x1), blk 1g heim tie rod w\/stab (x1), 4”x3\/4 bolt (x3), 3.25”x3\/4 bolt w\/Jam (x1), washer (x3), lock nut (x3), bin 78-4 (x2), bin 78-6 (x2), bin 78-10 (x4),bin 78-11 (x2), bin 78-12 (x2) , 2-34 (x1), 2-30 (x1), 2-33 (x1)","price":1177.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_a646c995-3439-409f-b8c6-49132ac7d635.jpg?v=1571439459"},{"product_id":"1","title":"1” front first gen dodge cummins lift spring set 72-93","description":"\u003cp\u003e1 Inch front lift leaf spring pair only (no additional components) for a 72-93 w250 or w350 (even a w150 frame) 1st gen dodge with a cummins engine. \u003c\/p\u003e\n\u003cp\u003eYou may want this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/dodge-front-dana-60-ubolt-kit?_pos=4\u0026amp;_sid=1ae0af564\u0026amp;_ss=r\"\u003e\u003cb\u003eu-bolt kit\u003c\/b\u003e\u003c\/a\u003e as well as this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/axle-spring-offset-plate?_pos=4\u0026amp;_sid=186fa528f\u0026amp;_ss=r\"\u003e\u003cb\u003eoffset plate\u003c\/b\u003e\u003c\/a\u003e or this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/custom-shackles?_pos=1\u0026amp;_sid=ac1556e14\u0026amp;_ss=r\"\u003e\u003cb\u003eshackle set\u003c\/b\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003e \u003cspan\u003eYou will also need to purchase \u003ca href=\"https:\/\/farfromstockstore.com\/products\/skyjacker-se12d-front-softride-spring-bushing-kit?_pos=1\u0026amp;_sid=3351e9c1c\u0026amp;_ss=r\"\u003e\u003cb\u003ebushings\u003c\/b\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e for this kit. \u003c\/span\u003e\n\u003c\/h2\u003e\n\u003cp\u003eWe suggest a couple mods to this leaf pack for performance and fit depending on your application. Call us after your purchase for suggestions.\u003c\/p\u003e","brand":"Far From Stock Skyjacker","offers":[{"title":"Default Title","offer_id":30219350179900,"sku":"d100cs pair (drop Skyjacker)","price":557.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_e15c1d06-e4e9-4180-b698-5acb7300a5b1.jpg?v=1571439459"},{"product_id":"2-front-first-gen-dodge-cummins-lift-spring-set-72-93","title":"2” Front 1G Dodge lift spring set 72-93","description":"\u003cp\u003eChoose 2 Inch front lift leaf spring pair only (\u003cstrong\u003eno additional components or bushings\u003c\/strong\u003e) for a 72-93 w250 or w350 (even a w150 frame) 1st gen dodge with a cummins engine. Or a gas v8\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eYou will also need to purchase \u003ca href=\"https:\/\/farfromstockstore.com\/products\/skyjacker-se12d-front-softride-spring-bushing-kit?_pos=1\u0026amp;_sid=3351e9c1c\u0026amp;_ss=r\"\u003ebushings\u003c\/a\u003e. \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eYou may want this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/dodge-front-dana-60-ubolt-kit?_pos=4\u0026amp;_sid=1ae0af564\u0026amp;_ss=r\"\u003e\u003cb\u003eu-bolt kit\u003c\/b\u003e\u003c\/a\u003e for a dana 60 as well as this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/axle-spring-offset-plate?_pos=4\u0026amp;_sid=186fa528f\u0026amp;_ss=r\"\u003e\u003cb\u003eoffset plate\u003c\/b\u003e\u003c\/a\u003e or this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/custom-shackles?_pos=1\u0026amp;_sid=ac1556e14\u0026amp;_ss=r\"\u003e\u003cb\u003eshackle set\u003c\/b\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWe suggest a couple mods to this leaf pack for performance and fit depending on your application. Call us after your purchase for suggestions.\u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"Diesel 2”","offer_id":30219400216636,"sku":"pair d200cs","price":627.0,"currency_code":"USD","in_stock":true},{"title":"Gas 2” (1.5-2.5)","offer_id":30219559731260,"sku":"d200s pair meyer","price":561.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_68787e9a-50bd-4d47-966b-84da318c5840.jpg?v=1571439459"},{"product_id":"6","title":"6” front first gen dodge lift spring 72-93","description":"\u003cp\u003eChoose 6 Inch front lift leaf spring pair only (no additional components) for a 72-93 w250 or w350 (even a w150 frame) 1st gen dodge with a cummins engine. Or a gas v8.\u003c\/p\u003e\n\u003ch4\u003eYou may want this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/dodge-front-dana-60-ubolt-kit?_pos=4\u0026amp;_sid=1ae0af564\u0026amp;_ss=r\"\u003e\u003cb\u003eu-bolt kit\u003c\/b\u003e\u003c\/a\u003e for a dana 60 as well as this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/axle-spring-offset-plate?_pos=4\u0026amp;_sid=186fa528f\u0026amp;_ss=r\"\u003e\u003cb\u003eoffset plate\u003c\/b\u003e\u003c\/a\u003e or this \u003ca href=\"https:\/\/farfromstockstore.com\/products\/custom-shackles?_pos=1\u0026amp;_sid=ac1556e14\u0026amp;_ss=r\"\u003e\u003cb\u003eshackle set\u003c\/b\u003e\u003c\/a\u003e.\u003c\/h4\u003e\n\u003ch3\u003eYou will need to purchase \u003cstrong\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/skyjacker-se12d-front-softride-spring-bushing-kit?_pos=1\u0026amp;_sid=3351e9c1c\u0026amp;_ss=r\"\u003ebushings\u003c\/a\u003e\u003c\/strong\u003e. \u003c\/h3\u003e\n\u003cp\u003eWe suggest a couple mods to this leaf pack for performance and fit depending on your application. Call us after your purchase for suggestions.\u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"Diesel 6”","offer_id":30219642339388,"sku":"d600cs pair stock item","price":721.0,"currency_code":"USD","in_stock":true},{"title":"Gas 6” (5-6”)","offer_id":30219669405756,"sku":"d600s pair meyer","price":721.0,"currency_code":"USD","in_stock":true},{"title":"Gas 8\"","offer_id":39340306989116,"sku":"D800S (meyer)","price":752.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_91f546f8-68dc-453b-9208-d7fffa954dc1.jpg?v=1571439459"},{"product_id":"72-93-dodge-dana-60-tie-rod-end-crossover-2-or-more-lift","title":"72-93 Dodge Dana 60 Crossover 2” or more lift (tie rod end)","description":"\u003cp\u003eThis is the \u003cspan\u003epre-fabbed and black powder coated part \u003c\/span\u003efor adding a bombproof crossover steering kit to your 4x4 dana 60 king pin style front axle and an optional tie rod utilizing HD tie rod ends. This is for your 72-93 dodge truck with 2-6 inches of lift, we have \u003ca href=\"https:\/\/farfromstockstore.com\/products\/no-lift-bolt-on-crossover-steering-72-93-dodge?variant=30108205908028\"\u003e\u003cb\u003ezero to 1 inch of lift\u003c\/b\u003e\u003c\/a\u003e too. All huge 1.5 inch 1\/4 wall tube. Good looking and stronger than your truck needs.\u003cbr\u003e\u003cbr\u003eHighly recommended option to simplify the steering box relocation and strengthen this application and you trucks frame at its most vulnerable location is our \u003ca href=\"https:\/\/farfromstockstore.com\/products\/72-93-steering-box-brace?_pos=2\u0026amp;_sid=4f81bf88e\u0026amp;_ss=r\"\u003e\u003cb\u003esteering box brace\u003c\/b\u003e\u003c\/a\u003e  \u003c\/p\u003e\n\u003ch3\u003eRequires removing the OEM 4WD steering box mounting plate, and shortening the existing steering input shaft or a new, improved u-joint \u003cb\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/1979-93-dodge-truck-steering-shaft-w-u-joint?_pos=1\u0026amp;_sid=8287de133\u0026amp;_ss=r\"\u003esteering input shaft\u003c\/a\u003e to replace the craptacular factory pot joint.\u003c\/b\u003e \u003c\/h3\u003e\n\u003cp\u003eCrossover Includes;\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/ruffstuff-specialties-passenger-side-dana-60-high-steer-arm?_pos=4\u0026amp;_sid=dd39368e8\u0026amp;_ss=r\"\u003e\u003cb\u003eDana 60 High Steer Arm\u003c\/b\u003e\u003c\/a\u003e and Stud Kit w tapered nuts\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCrossover Drag link, wrinkle black powder, bent and welded -1.5\" X .25\" wall DOM tubing\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSet of RH \u0026amp; LH Heavy Duty Tie Rod ends\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCrossover with Tie Rod adds;\u003c\/p\u003e\n\u003cp\u003eTie rod, welded -\u003cspan\u003e1.5\" X .25\" wall DOM tubing\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSet of LH \u0026amp; RH  \u003cspan\u003eHeavy Duty Tie Rod ends\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUnfortunately, crossover steering necessitates sway bar removal. You wont miss it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"color: #ff2a00;\"\u003eNecessary but not included:\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/dropped-pitman-arm-2?_pos=2\u0026amp;_sid=492481899\u0026amp;_ss=r\"\u003e\u003cb\u003e2” Lift - Pitman Arm\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/farfromstockstore.com\/products\/dropped-pitman-arm-4?_pos=1\u0026amp;_sid=700f89c9a\u0026amp;_ss=r\"\u003e\u003cb\u003e4” Lift - Pitman Arm\u003c\/b\u003e\u003c\/a\u003e  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eAdd a steering dampener \/ stabilizer to the above kits:\u003c\/h4\u003e\n\u003cp\u003e\u003ca title=\"Stabilizer Kit options\" href=\"https:\/\/far-from-stock.myshopify.com\/admin\/products\/4108552470588\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/a\u003eA great option at this time would be our dana 60 steering stabilizer setup. If purchased together, the tie rod mount can be integrated as a weld in fitting in the tie rod . See the third option at right.\u003c\/p\u003e\n\u003cp\u003eYou will also need to pick a stabilizer and a mount on the following page:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/far-from-stock.myshopify.com\/admin\/products\/4108552470588\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e Stabilizer options\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Due to the race type application of these heavy duty parts, even though they are stronger than anything else available and are safe enough for racers, this should be considered an off road part. \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"Crossover Kit w\/o Tie Rod","offer_id":30260260208700,"sku":"tre +2 lift 1g drag link, 1 Pair- TRESTAND \u0026 Jam Nuts, tapered steering arm and 4 bolt kit.","price":586.0,"currency_code":"USD","in_stock":true},{"title":"Crossover Kit with Tie Rod","offer_id":30266809122876,"sku":"tre +2 lift 1g drag link and tre 1g Tie Rod, 2 Pair- TRESTAND \u0026 Jam Nuts, tapered steering arm and 4 bolt kit.","price":957.0,"currency_code":"USD","in_stock":true},{"title":"Crossover kit with tie rod with Stabilizer Mount. (Must add stabilizer axle mount and shock seperately)","offer_id":39528403632188,"sku":"","price":1020.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder SINGLE Color Surcharge  Crossover kit without tie rod","offer_id":48186469777713,"sku":"","price":72.0,"currency_code":"USD","in_stock":true},{"title":"Double Coat Powder Surcharge, Illusion Colors, Faux Chrome, Et cetera.   Crossover kit w\/o tie rod","offer_id":48186471121201,"sku":"","price":122.0,"currency_code":"USD","in_stock":true},{"title":"Custom Powder SINGLE Color Surcharge-Crossover Kit with Tie Rod, Crossover kit with tie rod with Stabilizer Mount.","offer_id":48186477478193,"sku":"","price":194.0,"currency_code":"USD","in_stock":true},{"title":"Double Coat Powder Surcharge, Illusion Colors, Faux Chrome, Et cetera. - Crossover Kit with Tie Rod\/ Crossover kit with tie rod with Stabilizer Mount. (Must add stabilizer axle mount and shock seperately)","offer_id":48186480361777,"sku":"","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_0a5f799f-bd0e-44a6-81fa-c645c94cac84.jpg?v=1571439459"},{"product_id":"72-93-4x4-steering-box-brace","title":"72-93 (4x4 STOCK) Steering Dodge Steering Box Brace","description":"\u003ch6\u003e\n\u003cstrong\u003e\u003cspan class=\"s1\"\u003e  7\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"s1\"\u003e2-93 (4x4 STOCK) Steering Dodge Steering Box Brace\u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eThe best steering box brace for dodge ram trucks from 76-93 with \u003c\/span\u003e\u003cspan class=\"s2\"\u003estock 4x4 steering\u003c\/span\u003e\u003cspan class=\"s1\"\u003e (drag link connected to driver side of the axle) \u003c\/span\u003e\n\u003c\/h6\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eWorks in conjunction with your stock steering box adapter plate. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003eThe stock adapter plate is not included in this kit\u003c\/span\u003e\u003cspan class=\"s1\"\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eNo worries though, your original plate will no longer require its strength, so if it’s cracked up, weld it back together or get another. (sometimes we have them)\u003cbr\u003e   This is the strongest bolt on first gen steering box brace ever! Want to weld it on? No problem, just request no-powder, it’s designed to weld in easily if you want, no need though. \u003cbr\u003e   Designed to bolt on with 7 7\/16 bolts and one 3\/8 bolt and is strong as an ox. Generally mimics an oem 2wd box brace but on steroids. Perfect for your stock 4wd, or lifted 4x4.\u003cbr\u003e   We try as hard as we can to convince you all to convert to crossover steering because of its great benefits to the truck and handling, but some just don’t want to, and so this is take care of you too. Definitely a need if you are keeping it in its current original 76-93 4x4 configuration. \u003cbr\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eWe have an \u003ca href=\"https:\/\/farfromstockstore.com\/products\/1979-93-dodge-truck-steering-shaft-w-u-joint?_pos=2\u0026amp;_sid=1da577a64\u0026amp;_ss=r\"\u003einput shaft \u003c\/a\u003eand \u003ca href=\"https:\/\/farfromstockstore.com\/products\/75-93-dodge-4x4-truck-adjustable-drag-link?_pos=8\u0026amp;_sid=95aeba79d\u0026amp;_ss=r\"\u003edraglink \u003c\/a\u003eavailable to further keep this system working at its best potential. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e(Not for your\u003c\/span\u003e\u003cspan class=\"s2\"\u003e \u003c\/span\u003e\u003cspan class=\"s1\"\u003e4x4 with crossover steering or 2wd, for that, \u003ca href=\"https:\/\/farfromstockstore.com\/products\/72-93-4x4-steering-box-brace\"\u003e\u003cspan class=\"s2\"\u003eclick here\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003e )\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e\u003cspan class=\"Apple-converted-space\"\u003e   \u003c\/span\u003eFor 4wd dodge ram trucks from 76-93. W100 w150 w200 w250 w300 w350 ramcharger. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003e\u003cspan class=\"s1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"72-93 (4x4 ---STOCK---) Dodge Steering Box Brace","offer_id":31327694553148,"sku":"10071 P702","price":607.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/75517F86-311E-4AA7-8B1D-348B152CC68A.png?v=1716464139"},{"product_id":"72-93-w250-w350-front-stock-replacement-leaf-springs","title":"72-93 w250 w350  Stock Replacement Leaf Springs","description":"\u003cp\u003e\u003cstrong\u003eLTL SHIPPING REQUIRED: MUST CONTACT THE SHOP TO ORDER THIS PRODUCT. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eStock replacement  leaf spring  for a w250 or w350 from 72-93. Choose between 72-91 (1\/2” front spring eye bolt) and 92-93 (5\/8” front spring eye bolt). Both sets are 1900 lb capacity springs, 6 leaves, 2.5” wide and bushings included. Rear spring are regular or Heavy Duty.\u003cbr\u003eGreat to get rid of any sag or lean from your old springs. \u003c\/p\u003e\n\u003cp\u003eSold as pairs.\u003c\/p\u003e\n\u003cp\u003eneed\u003ca href=\"https:\/\/farfromstockstore.com\/products\/dodge-front-dana-60-ubolt-kit\"\u003e\u003cb\u003e u-bolts\u003c\/b\u003e\u003c\/a\u003e?\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"92-93 Front Diesel","offer_id":31596789203004,"sku":"general spring kc 34-800 (2) pieces (drop)","price":544.0,"currency_code":"USD","in_stock":true},{"title":"72-91 Front diesel","offer_id":31596810731580,"sku":"general spring kc 34-774 (2) pieces (drop)","price":486.0,"currency_code":"USD","in_stock":true},{"title":"Rear 6 Leaf 5\/8\" bolt","offer_id":32434957025340,"sku":"34-173 General spring - PAIR (drop)","price":485.0,"currency_code":"USD","in_stock":true},{"title":"Rear 7 leaf 3\/4\" bolt HD","offer_id":32434962956348,"sku":"34-153HD  General spring (2) pieces (drop)","price":936.0,"currency_code":"USD","in_stock":true},{"title":"Rear 7 Leaf 3\/4\" Bolt","offer_id":39574773596220,"sku":"34-153 (2) pieces (drop)","price":608.0,"currency_code":"USD","in_stock":true},{"title":"3\/4 to 5\/8 bushing set","offer_id":40186224279612,"sku":"U13S- General spring","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_610adfd0-fa1d-42e0-bb85-701b7700ebe4.jpg?v=1577746699"},{"product_id":"79-93-dodge-truck-telescopic-steering-shaft-2-u-joints","title":"79-93 Dodge Ram Truck Telescopic Steering Input Shaft 2 U-Joints","description":"\u003cdiv\u003e   The Borgeson Extreme Duty Steering Shaft for your 1979-1993 Dodge Full-Size Truck features a heavy duty telescopic design. This shaft connects from factory column to steering box and features an extreme duty design with two billet steel universal joints. A Borgeson heavy-duty truck assembly will fix that loose, wandering steering for good.\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cbr\u003eHeavy Duty Telescopic Design\u003c\/div\u003e\n\u003cdiv\u003eBillet Steel Universal Joints\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e   To verify fitment you must confirm that the existing rag joint flange on the base of your steering column is removable. If it is not, you must use the \u003ca href=\"https:\/\/farfromstockstore.com\/products\/borgeson-000940-telescopic-steel-steering-shaft-for-1979-1993-dodge-trucks\"\u003e\u003cb\u003e000940 steering shaft.\u003c\/b\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Borgeson","offers":[{"title":"Default Title","offer_id":31842402172988,"sku":"SKU 000943 Borg","price":248.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/products\/image_7172c01a-c263-4496-a96d-0832e3c0f3df.jpg?v=1582556057"},{"product_id":"1g-4wd-front-bilstein-shock","title":"1g 1St Gen Bilstein Shock 5100\/5160 series 4WD 2WD Front Rear Various Lifts","description":"\u003ch1\u003eSold as Pairs\u003c\/h1\u003e\n\u003ch2\u003eALL shocks require thinner bushing sleeves or knocking out the sleeve entirely to mount on OE mounts. Call for details.\u003c\/h2\u003e\n\u003ch3\u003eWant a nice looking 46MM Monotube shock that fits without modification? \u003ca href=\"https:\/\/farfromstockstore.com\/products\/skyjacker-m95-monotube-high-pressure-nitrogen-gas-charged-shock-1st-gen-1g-4wd-shocks?_pos=1\u0026amp;_psq=skyjacker+shock\u0026amp;_psid=9da54a8f0\u0026amp;_ss=e\" rel=\"noopener\" target=\"_blank\"\u003eSkyJacker M95\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003cp\u003eFor the rocky road ahead. Due to their larger tires and heightened stance, lifted vehicles place extra demands on a shock absorber‘s damping ability. BILSTEIN B8 5100 shock absorbers monotube design and patented digressive valving is uniquely suited to confront these demands. On or off-road, loaded or unloaded, BILSTEIN B8 5100 shock absorbers instantly react to changing road inputs to maintain a stable, controlled, and comfortable ride. Features \u0026amp; benefits: • 46mm monotube design ensures consistent, fade-free performance in all conditions • Patented digressive valving instantly reacts to changing surface conditions • Vehicle specific tuning • OEM certified mounting hardware allows for easy installation • Zinc plated for resistance against harsh elements • Limited lifetime warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSome items may have a lead time please call before ordering if time sensitive.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Meyer Distributors","offers":[{"title":"0\" Lift Shock Front Pair","offer_id":32395753226300,"sku":"33-185590 meyer","price":228.95,"currency_code":"USD","in_stock":true},{"title":"2-4\" lift shock Front Pair","offer_id":32385693319228,"sku":"33-230320 Meyer","price":228.95,"currency_code":"USD","in_stock":true},{"title":"6-8\" Lift Shock Front Pair","offer_id":32396552896572,"sku":"Meyer 33-185552","price":228.95,"currency_code":"USD","in_stock":true},{"title":"0-3\" Lift Rear Pair","offer_id":32543718309948,"sku":"33-230382","price":228.95,"currency_code":"USD","in_stock":true},{"title":"4-6\" Lift Rear Pair","offer_id":32543718637628,"sku":"33-185576 MYR","price":228.95,"currency_code":"USD","in_stock":true},{"title":"2WD Front (must reuse bar pins out of lower mount.) Pair","offer_id":32567569547324,"sku":"33-230405 TRN 14","price":228.95,"currency_code":"USD","in_stock":true},{"title":"05-16 Ford SD Front 4\" Lift Pair","offer_id":32669196124220,"sku":"24-185776   TRN14","price":228.95,"currency_code":"USD","in_stock":true},{"title":"2\" Drop Rear 2WD Pair","offer_id":32700620275772,"sku":"33-230344 TRN14","price":228.95,"currency_code":"USD","in_stock":true},{"title":"2WD Rear \/ 72-93 Dodge Front Coil Conversion Suspension Axle Swap Kit Pair","offer_id":32704129826876,"sku":"33-185552 TRN14","price":228.95,"currency_code":"USD","in_stock":true},{"title":"9\/16\" shock bushing  inner sleeves. (not the rubber) Pair","offer_id":39271945863228,"sku":"E4-B46-60R1 (smmt) (inhse)","price":7.95,"currency_code":"USD","in_stock":true},{"title":"Boots Pair","offer_id":39280251535420,"sku":"E4SR1Z001A05 TRN14","price":19.95,"currency_code":"USD","in_stock":true},{"title":"0-3\" Lift Front 5160 Resevoir Pair","offer_id":52421369856305,"sku":"bil25-331875","price":255.95,"currency_code":"USD","in_stock":true},{"title":"0-3\" Lift Rear 5160 resevoir Pair","offer_id":52421433655601,"sku":"bil25-331721","price":255.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/BIL-33-1875012009-2014F1504WDBilstein5100SeriesRearShock02.webp?v=1769189888"},{"product_id":"ffs-front-spring-brackets-and-shackles-new","title":"FFS Four Wheel Drive Front Spring Hanger Brackets and Shackles","description":"\u003cp\u003eHave a W150, W250, W350 And the front spring, front bracket, is cracked or rusty?  Is the bushing worn out in the rear bracket? \u003c\/p\u003e\n\u003cp\u003eAre you converting a D150-D350 to 4WD? We have all the spring brackets you need.\u003c\/p\u003e\n\u003ch4\u003eFront Spring Hanger Bracket Set:\u003c\/h4\u003e\n\u003cp\u003eAvailable in a +1\" or +2\" height. Includes frame attachment hardware. 1\/2\" spring bolt hole for 81-91. 92-93 guys will have to drill to 9\/16\" Powder coated FFS signature wrinkle black.\u003c\/p\u003e\n\u003ch4\u003eFront Hanger Brace Set:\u003c\/h4\u003e\n\u003cp\u003eThis is the little stamping the reinforces the front spring bracket and rivets\/bolts to the frame. Includes attaching hardware. Comes powder coated FFS signature wrinkle black.\u003c\/p\u003e\n\u003ch4\u003eFront Spring Rear Swing Shackle Frame Bracket:\u003c\/h4\u003e\n\u003cp\u003eThis is a nice new piece to replace a faulty OEM bracket or to convert your 2-wheeler to four-wheel drive. Includes mounting hardware, shackle bushing and sleeve.\u003c\/p\u003e\n\u003ch4\u003eFront Spring Swing Shackle set:\u003c\/h4\u003e\n\u003cp\u003eSee \u003ca href=\"https:\/\/farfromstockstore.com\/products\/custom-shackles?_pos=2\u0026amp;_sid=d618d5261\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ethis page\u003c\/a\u003e for our matching +1” or +2” lift shackles for rear of front springs in two heights.\u003c\/p\u003e\n\u003cp\u003eQUESTIONS ASKED: \u003c\/p\u003e\n\u003cp\u003e“So I need clarification with your Front Spring Hanger Bracket Set if I get the 2” plus the 2” shackles is that 4 inches of lift or only 2, and if I only get the bracket set is it 2” of lift or half that with just the stock shackles? I’m putting in 6 inches of lift to remove my 4.5 inch block and I’m looking to remove the bottom 2 leafs on the front I wanna make the truck level.“\u003c\/p\u003e\n\u003cpre data-originalfontsize=\"14px\" data-originalcomputedfontsize=\"14\"\u003eHey man, great question — glad you reached out before ordering.\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur Front Spring Hanger Bracket Set is a true 2” lift by itself. That lift comes from relocating the spring mounting point, not from the shackle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you pair that with our 2” lift shackles, the lifts stack, so yes — you’re looking at right around 4” of total lift up front when both are used together.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRunning it with just the bracket and stock shackles will still net you the full 2” lift — not half. The shackles just add additional height on top of that.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNow with your setup:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eYou’re going to a 6” lift total\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRemoving a 4.5” block in the rear\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePlanning to pull the bottom 2 leaves up front\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThat leaf removal will soften the spring and typically drop you a bit (usually ~0.5–1”), so running both the 2” bracket + 2” shackles (≈4” total) is a solid move to help keep the truck sitting level once everything settles.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you want it dialed perfectly, we can also help fine-tune with shocks or additional setup recommendations — just let me know your full setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAppreciate you checking in 🤘\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Far From Stock","offers":[{"title":"+1\"  Front Spring Hanger","offer_id":40243047235644,"sku":"P708","price":301.0,"currency_code":"USD","in_stock":true},{"title":"+2\" Front Spring Hanger","offer_id":40243047759932,"sku":"P708","price":302.0,"currency_code":"USD","in_stock":true},{"title":"Front Hanger Gusset","offer_id":40243051921468,"sku":"P708","price":156.0,"currency_code":"USD","in_stock":true},{"title":"Front Spring Rear Swing Shackle Frame Bracket","offer_id":40243049037884,"sku":"P708","price":593.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/FullSizeRender_0ab7bc10-f2b9-4fcd-9541-a6264fffee7b.jpg?v=1733174650"},{"product_id":"89-93-w250-w350-frent-end-rebuild-kit","title":"89-93 W250-W350 Front end rebuild kit Dana 60 and Component parts.","description":"\u003cp\u003eIncludes all wear items in the front of your 4x4 Dodge.   All Moog parts. \u003c\/p\u003e\n\u003cp\u003eUpper kingpin bushings and seals X2\u003c\/p\u003e\n\u003cp\u003eLower kingpin bushings and seals X2\u003c\/p\u003e\n\u003cp\u003eSteering box input shaft repair kit X1\u003c\/p\u003e\n\u003cp\u003eDrag Link\u003c\/p\u003e\n\u003cp\u003eLeft tie rod end\u003c\/p\u003e\n\u003cp\u003eRight Tie rod end\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"meyer distributing","offers":[{"title":"Default Title","offer_id":51952797548849,"sku":"Drag DS914, L tie rod ES2010L, R tie rod ES2010R, kingpin upper K6652,  king pin lower  K8832 , steering shaft rebuild 425253 (rock)","price":559.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/AMG_K8832_P04_ANG.jpg?v=1761163831"},{"product_id":"skyjacker-m95-monotube-high-pressure-nitrogen-gas-charged-shock-1st-gen-1g-4wd-shocks","title":"Skyjacker M95 Monotube High Pressure Nitrogen Gas Charged Shock 1st gen 1G 4WD shocks","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSOLD AS PAIRS. CALL FOR SINGLES .\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAre you looking for a gas charges monotube shock for your first generation Dodge, like a Bilstein 5100, without modifying the shock or the mounting points on your truck? We have the parts for you now.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnleash your vehicle’s true potential with Skyjacker M95 Monotube Shocks. Engineered for the adventurer who demands superior ride quality and exceptional handling, these shocks are designed to deliver a smooth, stable, and responsive driving experience on any terrain.\u003c\/p\u003e\n\u003cp\u003eCrafted with a high-pressure nitrogen gas charge and monotube design, the M95 shocks provide faster response and reduced fade compared to traditional twin-tube shocks. This advanced configuration ensures optimal damping performance, keeping your tires firmly planted on the ground and giving you precise control, whether you’re tackling rocky trails or cruising on the highway.\u003c\/p\u003e\n\u003cp\u003eThe Skyjacker M95’s robust build features a 46mm bore, making them perfect for intense off-road conditions. They offer 180 degree directional mounting and a chrome piston rod. No fade or Lag for constant performance. Conquer the road ahead with confidence and comfort with M95 Monotube Shocks—the ultimate choice for those who refuse to compromise on performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Far From Stock Skyjacker","offers":[{"title":"Front  0-1\" lift PAIR","offer_id":55327013077297,"sku":"M9547  (sky)","price":219.95,"currency_code":"USD","in_stock":true},{"title":"Font 2-3\" Lift PAIR","offer_id":55327119802673,"sku":"M9527 (sky)","price":219.95,"currency_code":"USD","in_stock":true},{"title":"Front 4-6\" Lift PAIR","offer_id":55327120720177,"sku":"M9517 (sky)","price":219.95,"currency_code":"USD","in_stock":true},{"title":"Rear 0-4\" Lift PAIR","offer_id":55327050039601,"sku":"M9568 (sky)","price":219.95,"currency_code":"USD","in_stock":true},{"title":"Rear 4-6\" Lift PAIR","offer_id":55327224627505,"sku":"M9568 (sky)","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/M9384.jpg?v=1784321126"},{"product_id":"1st-gen-steering-stabilizer-dual-kit-silver-stabilizers","title":"1st Gen Steering Stabilizer Dual Kit- Silver Stabilizers","description":"\u003cdiv id=\"et-content\" class=\"content et-clearfix padding-false\"\u003e\n\u003cdiv class=\"post-layout-single product-layout-single advanced\"\u003e\n\u003cdiv class=\"container et-clearfix\"\u003e\n\u003cdiv id=\"product-2642\" class=\"product type-product post-2642 status-publish first instock product_cat-silver-9000-steering-stabilizers product_cat-steering-stabilizer has-post-thumbnail sale taxable shipping-taxable purchasable product-type-simple post\"\u003e\n\u003cdiv class=\"before-description-wrap\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\" aria-labelledby=\"tab-title-description\"\u003e\n\u003cp\u003eSteering Stabilizer Dual Kit; Silver w\/Black Boots;\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et-clearfix\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Far From Stock Skyjacker","offers":[{"title":"Default Title","offer_id":55327368446257,"sku":"9220 (sky)","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1345\/3969\/files\/9220.jpg?v=1784322429"}],"url":"https:\/\/farfromstockstore.com\/collections\/1st-gen-front-leaf-suspension-and-steering.oembed?page=2","provider":"Far From Stock ","version":"1.0","type":"link"}